|
Search
Useful Links  |
Cabinet Racks and Enclosures
Rittal extends its range of IT cooling solutionsDue to a repositioning of the fan within the raised floor of Rittal's new Computer Room Air Conditioning (CRAC) system an increased efficiency of typically 30 per cent of fan energy consumption can be achieved. 
Rittal new 68 page catalogue shows outdoor cabinet rangesRittal has released a 68 page catalogue, CS Outdoor Solutions, featuring their range of outdoor enclosures, many of which are available from stock. 
ELM cabinet locking and monitoring system from EMKAThe EMKA CAN-BUS ELM cabinet locking and monitoring system is even simpler with their 3000 Program 19" RMU. This takes advantage of the ELM system modularity to provide a complete cabinet system in a compact 1U housing for quick and easy installation. 
1/4 turn spanner lock from FDB with FIAT insertFDB Panel Fittings are delighted to now offer a new IP65 quarter-turn spanner lock that an only be opened by use of a special non-standard key. This new lock is provided with a FIAT insert making it ideal for situations where a conventional lock could be easily opened by unauthorised persons using readily available keys or simple tools. 
New Power Distribution BrochureRittal have released a replacement brochure for their power distribution range of enclosures, motor control centers and components. With over 140 pages of product information, technical information and system examples the Ri4Power brochure covers all applications up to 5500 A and forms of separation Form 2 – 4. Electrorack Enclosure Products Joins Data Center AllianceMinicom Advanced Systems, a leading developer of IT & KVM remote access and management solutions, announced that Electrorack Enclosure Products, which designs, manufactures and delivers quality, market-leading enclosure solutions, has joined the Data Center Alliance (DCA). 
Rittal’s Electronics Catalogue now on CDRittal has released a CD of its popular catalogue for Electronics Enclosures and associated products. Customers faced with the size of Rittal's Handbook 32, were demanding a more portable look up system which complemented the information available on the website. 
Rittal guide rails can be varied in lengthRittal has introduced two ranges of guide rails for Printed Circuit Boards which can be made to suit any depth of PCB insertion. Utilising plastic end pieces which include a funnel entry to ease PCB insertion, the new guides can be equipped with clips to discharge static charges from the board prior to full insertion. The end pieces are simply pushed into a central aluminium section which can be varied in length to suit any application. 
Verotec new 300 page enclosure catalogueVerotec manufactures and supplies, from the original tooling, the Vero Electronics families of metal enclosures, system components, power supplies, backplanes and configured hardware solutions for open system architecture, general purpose and ruggedised electronic applications. A new 300 page full colour hard copy and PDF product catalogue is now available, giving full technical and application details of more than 4000 standard products. 
EMKA quarter-turn locks to IP66The well proven EMKA 1000 series of quarter turn locks has received a very significant upgrade which enables an improved level of sealing. Customers may now order the new IP66 option, with the result that panel builders can now readily achieve higher sealing specification for completed cabinets, which is demanded for food processing industries and outdoor environments where high levels of sealing are required to meet safety considerations so as to protect against driving ran and hosing-down with power washers. 
Preventing water ingress from underneath outdoor cabinetsWe are all aware of the need to protect electrical installations from the weather, and with the increasing use of electronic equipment in external, and often remote, locations, most enclosure manufacturers provide adequate protection from the elements for the internal products. 
Small IP65 Locks For Small Cabinets From EMKAEMKA's 1022 program quarter-turn locks – popularly known as "mini-locks" have the style and capability of their big brothers in a miniature package suitable for smaller cabinets, wall mount enclosures, access panels or other housings. They are very useful where space and design limitations demand easy operation as well as a good level of rugged serviceability. The 1022 program locks are also available with additional sealing rings for applications where protection to IP65 is important – and for heavy dust environments a special dust cap can further improve sealing capability. 
Camdenboss - Deep Profile ABS Enclosures In Three ConfigurationsCamdenBoss has launched a range of stylish deep profile ABS enclosures that offers six sizes and three configurations for a multi-purpose solution to protect and house electronic equipment. The new 1100 series features modern design aesthetics accentuated by bevelled edges and two curved side walls. The base is moulded in ABS (light grey similar to RAL 7035 with other colours available on request) with three lid configurations comprising ABS (series 1101), high impact transparent polycarbonate with smoked effect (series 1102) and 1mm silver anodised aluminium (series 1103). 
FDB Introduced Vandal Resistant Security For CabinetsThe Panel Fittings specialists at FDB can now provide greater security swinghandles for electrical/electronic/telco cabinets. These new IP65 swinghandles are especially designed for applications where security is a significant concern, specifically in situations where cabinets are exposed and accessible to the general public and for outdoor installations exposed to the weather where IP65 dust/water sealing is important. 
Configurable modular integrated systems for cPCI, PXI, VMEbus, VME64X and VPX applicationsDesigned for use in development systems and for production runs, Verotec has introduced a family of 1U, 2U, 3U and 6U configurable integrated systems. Based on combinations of standard products, the easy to use six-step configurator enables the specifier to define the exact system best suited to the application. Minicom Introduces Two New Products for Increasing IT Efficiency in High Density Server and Industrial PC EnvironmentsMinicom Advanced Systems introduces its newest LCD drawer with a built-in KVM switch, the SmartRack 232, which helps IT administrators impose order on the chaos of overcrowded server rooms. By reducing cable clutter and streamlining workflow at the rack, the SmartRack 232 gives IT managers sorely needed room in the data center. A slim, space-saving solution, the SmartRack 232 is an integrated KVM switch for two users, with simultaneous access and control of up to 32 mixed-platform (PS/2 and USB) servers. Rack-mountable and hardware-based, the SmartRack 232 is the most compact choice for KVM access to servers at the BIOS level. 
Data centre saves costs with Ri4PowerEquinix from Frankfurt, a leading provider for colocation services, has equipped its data centres with Rittal TS 8 server racks for many years. Now the data centre specialist focuses on a further Rittal domain, equipping its data centres using Rittal's power distribution technology Ri4Power. 
Frame facilitates internal mounting in Rittal Outdoor enclosureRittal has built a range of outdoor enclosures around a central stainless steel frame. This provides stability and because it is made from their standard TS 8 punched section profile, it also offers an optimal mounting for any internal fitments. 
Rittal launches new modification serviceRittal has launched a new service that will allow the specification of holes, cut-outs and engraving in their extensive range of enclosures. Based in a new facility at their UK headquarters in Rotherham the service will offer a 5 working day delivery on enclosures modified to users specification using a state-of-the art machining centre. 
Hybrid system combines MicroTCA with VME or CompactPCIElectronics packaging specialist Schroff has introduced a new hybrid system that combines established bus formats such as VME or CompactPCI with the emerging technology of MicroTCA in a single 3U-high 19in. subrack. 
Rittal’s Ripac allows a multitude of optionsRittal's wide range of subracks, all branded under the Ripac banner, provide users with multiple options for housing printed circuit boards or plug-in modules in a 19" rack environment. 
CamdenBoss P4190 New Series of EnclosuresCamdenBoss has launched a new range small enclosures that offer robust construction, snap-fit screwless assembly and optional gasket sealing to IP65. The new 30 series is available in three ranges: Pock Box, Handy Case and Grip Case. Available in three sizes, 31 series Pock Box enclosures are small and robust hand-held boxes in a contemporary and functional design providing an exceptionally good "feel" due to bevelled and rounded edges. 
Rittal Equip and Cool State of the Art Data CentreAs many organisations seek to host their hardware and applications in purpose built facilities rather than investing in the high cost themselves, Data Centres have become an integral part of today's business environment. Node4 owns and operates a portfolio of Data Centres throughout the UK which conform to the highest service levels within the commercial data marketplace. Due to their rapidly growing customer base they opened a new Data Centre, DC3, in Wakefield, West Yorkshire, in July of this year, which they chose to equip with Rittal TS 8 racks and to maximise their cooling utilised the Rittal Cold Aisle Containment System. 
Rittal announce 2kW Cool Efficiency unitFollowing the successful launch of Rittal's new cool efficiency 1kW DIN EN ISO 14021 cooling unit earlier this year, Rittal has now added a 2kW unit to the portfolio. The cool efficiency products are up to 45% more economical than conventional cooling units of the same cooling output in both running costs and CO2 emissions. The units have been developed using the latest EC fan technology and incorporate the Rittal nano-coated condenser and condensate management as standard. 
Rittal - Plug-in modules for PSM railsRittal has extended its Power System Module (PSM) range to allow the power consumption of individual servers and peripheral hardware to be measured per socket. New plug-in modules for PSM rails record the individual currents for each socket and show the power consumption of the devices connected via three coloured LEDs on the right-hand side. A second LED on the left-hand side of the outgoing slots provides an overview of the overall power of the module. The presentation logic is automatically adjusted to the mounting position to rule out any misinterpretation. 
Rittal’s new Outdoor Enclosure SystemRittal's Toptec CR is a twin-walled outdoor enclosure system that offers all-round protection for highly sensitive electronics systems such as those needed for mobile telephony, data transmission or instrumentation. 
Rittal’s new System Configurator for subracksFaster delivery times can now be achieved for Ripac customised subracks. This is made possible by a new system configurator, developed in cooperation with Rittal's Mind8 subsidiary. Rittal customers can easily use the software's user friendly graphical interface to create their own subracks and accessories. 
FDB announces snap-line panel fittings rangeFDB Panel Fittings recently introduced the SNAP-LINE range of panel hardware components. This range of locks/handles, hinges, compression latches, quarter-turns, swinghandles, joining elements, pull handles and slam latches is likely to interest specialist enclosure or cabinet builders who are looking for a simple labour saving way to rationalise panel punching and subsequent assembly. 
TEKAL 3SP - Extruded Aluminum Keypad EnclosuresThe new 'TEKAL 3SP' enclosures, from TEKO, have been designed for desktop and wall mounted keypad devices. Typical applications will include test and measurement equipment, communications, peripherals, security systems and medical and wellness technology. 
Schroff and Bus Solutions sign VAR agreementElectronics packaging specialist Schroff has appointed Rochdale-based Bus Solutions as its first value-added reseller for the UK market. The agreement will enable Schroff customers to obtain highly integrated, bespoke systems in short timescales with no minimum order quantities. 
Short Depth 2U Screen Keyboard DrawersAustin Hughes Europe has announced the new RKP series 2U short depth LCD Keyboard drawers. Using a 15", 17 or 19 SAMSUNG Class 'A' LCD panel these short depth drawers are only 480 mm deep making them ideal to fit into a 500mm + depth racks with KVM capability. They have improved aesthetics with a new front panel design that encompasses two quick release screen locking points and are supplied with 'One Man' installation slides. The dual slide drawer is ideal where the screen needs to be viewed directly behind a closed cabinet door with the keyboard in its parked position. 
Desktop enclosures in 10.5 and 19inch widthsVerotec's Verotec instrument case family combines stylish, modern design with high levels of functionality and outstanding technical attributes. Optimised for high end instrumentation applications, but equally applicable for use in diverse sectors such as telecommunications, industrial control equipment and storage for RAID arrays, multimedia systems and file servers, the Verotec family incorporates a wealth of user features and options. 
WK4 enclosure from RittalOptimum protection for system technology is a key requirement of enclosures that are requested for public safety digital networks, often known as TETRA. The tenders contain demands that are based on the theft protection for facility management and describe the protection of windows and doors against vandalism and burglary. The underlying standard is DIN V ENV 1630, 1999-04. 
Catalogue details comprehensive range of PCB retainersNow available from electronics packaging specialist Schroff is a new catalogue detailing the comprehensive range of ruggedised PCB retainers manufactured by Calmark. Schroff and Calmark are sister companies within the Pentair Electronic Packaging Group, and Schroff is now the exclusive supplier of Calmark's products in the UK. 
Dehumidifier system removes condensation from inside an enclosureEnclosure specialist Schroff has launched a new dehumidifier system that is designed to remove moisture from the air within an enclosure, providing an inexpensive yet highly effective way to protect electronic and electrical components from condensation. 
Quick planning tools for support arm systemsRittal is expanding its range of configurators for the Comfort Panel and Optipanel command panels by adding another engineering tool: the new Configurator for support arm systems. Now, the new CP-C support arm system and the already well-known CP-S, CP-L, CP-XL support arm systems can be configured quickly and securely via the Internet. 
DEM Manufacturing offers IP67 and IP68 Aluminium EnclosuresA new series of aluminium enclosures from DEM Manufacturing provide the highest standard of protection against dust and water, and will withstand prolonged immersion in water. They are ideal for systems exposed to the most demanding environmental conditions in marine, industrial, food preparation, transportation, leisure and other applications. 
Rittal’s MicroTCA shrinks control systemsRittal has launched a genuine 2U system, the "pre-shrunk" PicoTCA. Available virtually from stock the PicoTCA is equipped with a 350W power supply with power management, a fully compliant backplane and mechanics, which allow the accommodation of up to 9 full size AMCs or 6 Full size and 6 Half size AMCs, and push-pull cassette fan trays with a filter on the air inlet. 
Extended Range of Die-Cast Hand-Held EnclosuresROLEC has extended its range of 'handCASE' enclosures with four new 'Type R' models which now have a full format top recess for membrane keypads or product labels. These high performance IP 66 aluminium enclosures have been designed for mobile hand-held electronics which are used in harsh indoor or outdoor environments. 
Remote unlocking IP65 and IP40 versions from EMKAThe EMKA program of electronic access control locks continues to expand with these two new swinghandles which integrate with the proven EMKA ELM system so enabling remote unlocking and access logging. These are likely to find application in indoor electronic racks, data centres, server cabinets, co-location cabinets etc, as well as outdoor telecoms cabinets, e.g. in remote situations where lack of keys and remote unlocking are seen as significant advantages. 
Pre-assembled combiner box saves installation time and costsThe recently introduced SOLARLOK combiner box assembly from Tyco Electronics comes completely pre-assembled, saving valuable installation time and costs. The plug and play design also minimizes errors during installation. The device combines up to five strings in a pre-terminated connectorized weather-resistant enclosure, meeting National Electric Code (NEC) requirements for series fusing of photovoltaic modules. The box is also approved according to the standards of Underwriters Laboratories Inc. (UL) 1741 to be used as an accessory for inverters. 
Multi-Function Desk and Wall-Mount Enclosures from OKWOKW have added desk and wall mount versions of their ground breaking 'INTERFACE-TERMINAL' cases. These highly attractive and ergonomic enclosures have been designed for fast installation and replacement of the electronics. Typical applications will include medical and wellness equipment, measuring and control instruments, security systems, and point-of-sale terminals. 
Verotec - Filtered, intelligent and monitored 1U fan traysDesigned to provide localised cooling of 19 rack mounted or desktop equipment, the range of 19" 1U standard fan trays from Verotec consists of two depths, a 250mm deep unit fitted with three fans and a 350mm deep unit with six fans, fitted with either a 3mm thick silver anodised aluminium or a 3mm black powder coated steel front panel. 
PCB retainers offer high clamping force for defence and aerospace systemsNow available from electronics packaging specialist Schroff is a series of PCB retainers that provide a clamping force of more than 4000N, making them ideal for use in the most challenging environments, especially those associated with defence and aerospace systems. 
Schroff develops new retention device to meet Rugged MicroTCA requirementsElectronics packaging specialist Schroff has developed a new retention device for securely fastening AdvancedMC modules into a MicroTCA subrack to enable such systems to withstand the extreme shock and vibration conditions laid down in the recently issued MicroTCA.1 specification. 
Pizza Box 1U Rack Enclosures to take away from ForemostForemost Electronics has announced the introduction of a range of 1U, 19" rack mountable "Pizza Box" enclosures. The new Elma Slimkit 10 is a flexible enclosure solution for free standing or 19" rack mounted systems. The basic chassis can easily be transformed into a complete case by adding a rear panel and top cover to the basic mounting chassis. 
Airfield mains power pillar from FDB ElectricalMains power distribution across outlying areas of military and civil airfields poses its own specific problems of environmental, security and electrical protection for maintenance personnel - problems which fortunately the specialists at FDB Electrical are experienced at solving. 
Power Search facility simplifies subrack selectionElectronics packaging specialist Schroff has introduced a Power Search facility on its website to simplify the task of selecting products from its comprehensive range of europacPRO subracks. Through a step-by-step process of choosing the appropriate options for parameters such as height, width, depth, shielding and backplane compatibility, users are presented with the part number and details of a subrack to meet their exact requirements. Rittal Offers further Complimentary WorkshopsFollowing the success of earlier seminars, strategic partners EPLAN, Phoenix Contact and Rittal are holding a further series of complimentary half day workshops and seminars. These seminars demonstrate how EPLAN, Phoenix Contact's CLIP PROJECT and Rittal's Ri4Power design software, can work in synergy offering new solutions that can save time and provide flexibility in the way you design, build and enclose your control cabinets. 
General purpose and IP66 small die-cast aluminium enclosuresHammond Electronics has launched the initial six sizes in the new 1550 family, a range of industry standard sizes small die-cast aluminium enclosures that provide robust mechanical protection and good EMC attenuation levels, making them suitable for a use in a wide variety of applications. The full range will consist of sixteen sizes, all of which will be available by the end of 2009. Available with a natural or black epoxy powder coated finish, the units are supplied in two versions, standard and watertight. 
Key locking stainless steel handlesThese wing, T and L handles in AISI 316 grade stainless come at a high specification for material and sealing at IP65. Standard EMKA modular cylinders and keys complete the package for use in all sorts of arduous, wash-down, corrosive or otherwise very difficult environments. 
IP 67 Aluminium Enclosures with Snap-on DeviceDesign engineers are frequently asked to develop electronics equipment that can be installed, or replaced, in an instant. To meet this need, ROLEC have developed the new 'aluCLIC' enclosures which feature a snap-on mounting device that replaces the traditional wall mounting screws. With this mounting device, pre-assembled systems can be mounted in situ without the need to open the enclosure. Thus the electronics can be installed and replaced with just a simple click. 
Enclosures protect sensitive electronics in extreme environmentsElectronics packaging specialist Schroff will be exhibiting a complete family of ruggedised enclosure solutions designed to protect sensitive electronic systems in the most demanding of environments. From 19in. cabinets and subracks to retainers for printed circuit boards (PCBs), Schroff's comprehensive range of products for military applications provide high levels of resistance to shock and vibration, suppression of electromagnetic interference, sealing against dust and moisture, and efficient thermal management. 
Rittal - Cable ducts and shunting elements for excess lengths of network distribution cablesRittal has expanded its range of high-density patching accessories with the introduction of two cable ducts for 1000 and 2000mm high enclosures. To compliment the cable ducts, Rittal have also launched new cable-shunting elements which can handle excess lengths of cable and be applied as a radius reducer when redirecting cables. These new products will aid in the accommodation of large volumes of cable within the network distribution system and reduce the amount of space employed for cabling in data centres. 
Schroff enhances its data centre infrastructure capabilityThe Datacoms Division of Schroff UK has enhanced the power distribution capabilities of its core range of thermally managed cabinets through a partnership agreement with Raritan. Schroff cabinets can now be factory fitted with single- and three-phase high output intelligent power distribution units giving up to 22.1 kW per cabinet input power. Devlin - stainless steel kiosk keyboardsDevlin today announce a new addition to their broad range of stainless steel kiosk keyboards offering further layout flexibility. The new KSM-096 is designed to fit into the middle of the Devlin range which already contains full size and reduced layout kiosk keyboards. The KSM-096 features a compact layout but this is achieved without removing the separate number pad or function keys. The compact design means the KSM-096 has a footprint of only 420x165mm, ideal for use in confined spaces. The new KSM-096 is in fact only around 20mm longer and wider than the Devlin reduced layout KSM & KSR-067 kiosk keyboards. 
3U MicroTCA system facilitates testing of AdvancedMC modulesElectronics packaging specialist Schroff has introduced a new 3U, 4-slot MicroTCA system that has been developed to provide a convenient platform for the testing and evaluation of AdvancedMC modules. Based on Schroff's ratiopac-PRO 19in. desktop case, the new integrated system includes a special MicroTCA backplane, four extra-wide AdvancedMC slots, a 400W ATX power supply unit with a wide input range of 90 to 264VAC, and active cooling using a total of eight 5V fans. 
Verotec's KM6 subrack family is suitable for practically every applicationVerotec's KM6 subrack family is arguably the most comprehensive and versatile system available. Originally developed by Vero Electronics, it has continually evolved over time to reflect the changing demands of the electronics industry. All four main elements of the KM6 range: KM6-II, -RF, -EC and –HD167 offer an unrivalled combination of strength, versatility and configurability; each range is optimised to suit a specific application or price point. It conforms to DIN41494, IEC297 and IEEE1101.10 and .11. Hi-Speed Customisation Service for Subracks and PanelsRittal has introduced a new hi-speed service especially for subracks and plug-in board front panels, providing a one stop shop for the customisation of front panels, including cut-outs, screen printing, engraving and alternative finishes. The service is available for flat & profiled EMC panels and also for AMC and PMC panels. Wide range of stainless steel panel fittingsEnclosure hardware specialists FDB Panel Fittings has announce da comprehensive range of stainless steel locks, hinges and handles suited to petrochemical plants, hospitals, food processing establishments, medical environments, outdoor installations, marine and offshore industries. 
Modern Slim-line Wall-Mount EnclosuresTEKO has launched the new 'OVOTEK-WALL' cases which have been designed for modern indoor wall mounted electronics. Applications will include door entry and security systems, equipment controllers, detection devices, medical electronics and much more. 
Huge Range of EnclosuresCynergistic Technologies is sellling enclosures from Apra Gruppe of Germany. Founded in 1969 Apra have grown over the years and encompass virtually all enclosures under one roof including the following; 19''-cabinet systems; sub rack systems; desktop/small enclosures; panel Instrument cases; and custom plastic enclosures. 
Rittal extends IT Rack rangeRittal has extended its range of high-quality rack solutions for global networks with the new TE 7000 IT Rack. The TE 7000 IT Rack is based on a self supporting 482.6mm (19in) that simultaneously functions as a robust enclosure frame. Easily installed, the IT Rack is available in variable depths between the roof and bottom frames and the front and the back. 
Camden Electronics Completes Acquisition of Boss EnclosuresCamden Electronics has acquired Boss Enclosures Ltd, the Suffolk-based manufacturer and distributor of plastic and metal enclosures, 19in racks and cabinets, uniting two exceptionally strong brand names in the electronics, electrical and telecommunications industries. 
Extended range of 19in modular general purpose and EMC rack casesThe range of 1, 2 and 3U 19in general-purpose rack cases from Verotec has been extended with the addition of 4, 5 and 6U heights. Available in depths of 250, 350 and 450mm, the rack cases enable a wide range of electronic, electric and electro-mechanical equipment to be easily mounted in a standard 19" enclosure. The modular design enables the units to be configured to the exact requirements of a particular application, with the specifier generating a single order code to define the unique product. 
Birtcher and Calmark PCB retainers available in the UK exclusively through SchroffElectronics packaging specialist Schroff has announced that it is now the exclusive UK supplier of the ranges of ruggedised PCB retainers and associated products manufactured by Birtcher and Calmark, which are Schroff's sister companies within the Pentair Electronic Packaging Group. 
Rittal Enclosure Awarded ‘Hygiene –Tested’ CertificationRittal's HD (Hygienic Design) series of enclosures have been awarded the 'BG-PRÜFZERT' test label by the German Health & Safety Association. The Hygienic Design Series is thus entitled to bear the label 'Hygiene-tested' as a testament to its use as a safe and salutary product. The test report describes how "The compact enclosure HD is suitable to accommodate electrical equipment in the food industry and is resistant to the cleaning and disinfectant agents typically used within the industry. It is also dust-proof and protects the installed components against strong jets of water (protection category IP66)." 
1100-page catalogue provides comprehensive information on enclosuresElectronics packaging specialist Schroff has launched a new edition of its main catalogue. Running to over 1100 pages, Edition 23 provides detailed technical information on the company's complete range of products, including cabinets, cases, subracks, plug-in units, embedded systems, backplanes and power supplies. 
Smaller sizes added to ROLEC aluCASE rangeROLEC have added ten new smaller sizes to their existing range of 'aluCASE' die-cast aluminium enclosures. These modern and easy to use IP 67 enclosures have many intelligent features to make installation of the electronics or electrical equipment very easy. 
Rittal Receives SAFEcontractor Health & Safety AccreditationRittal has announced that they have attained accreditation with SAFEcontractor and are now an approved contractor for the Installation and Baying of Server Racks with Cooling Cabinets (Water Cooled). SAFE Contractor is an accreditation scheme that recognizes very high standards of health and safety practice. 
Soft Touch Hand-Held Enclosures from OKWTEKO has launched the 'TEKNET-PULPIT' enclosures which have been designed for hand-held electronics. Typical applications include in-field test and measurement instruments, medical devices, data loggers and much more. 
Compact MicroTCA system houses up to six AdvancedMC modulesNew from electronics packaging specialist Schroff is a compact MicroTCA system that can accommodate up to six single mid-size AdvancedMC modules in a 19in enclosure with a height of only 1U. Featuring a special case design that ensures efficient cooling of the modules, the 1U MicroTCA system is ideal for use in high-performance multi-processor systems where rack space may be limited – for example, in industrial or transportation applications. 
Pick-and-Mix Horizontal Bus-Based System Housings from RittalA new concept in VME64x and CompactPCI rack-mounted system design is now available from Rittal in the form of a set of horizontally cooled housings. Assembled from a selection of backplane(s), power supplies, rear I/O, HDD and monitoring via a pick-and-mix process, the housings are able to accommodate two system slots per U of height (44.45mm). 
RFI capability added to heavy duty watertight enclosuresHammond Electronics has extended the capabilities of the 1457 extruded aluminium family of small enclosures with the introduction of RFI screened IP54 environmentally sealed versions. The 1457 E Series is designed to house PCBs, directly mounted horizontally into internal slots extruded in the case body; the units can also be used to house any small electronic, electrical or pneumatic components. 
High Security Baying Systems from RittalRittal's high security server cabinets offer strength and stability for virtually any server environment. Built with Rittal's patented 16-fold continuously welded frame, the TS 8 Server cabinet is said to deliver 30% more dimensional stability than available alternatives and sets the benchmark for value and functionality. 
Multi-Colored Enclosures for Personal ElectronicsDue to popular demand, OKW has extended its 'MINITEC' pocket enclosures with two larger sizes EL and DL. These highly attractive multi-coloured cases have been designed for personal electronic devices which can be carried in the hand, on a key ring, wrist strap, or neck chain. 
Verotec's 1U 19in low cost chassis for cPCI and VME64x systemsVerotec has announced its new 1U desktop or 19in rack mount powered and thermally managed chassis. Complete with a 250W auto-ranging ATX PSU and six separate cooling fans, the unit is fitted with either a 6U 8HP 2 Slot cPCI or a 6U 8HP 2 Slot VME64x backplane, enabling the same mechanical platform to be used for either of the two most popular bus structures. 
Vero launches VeroDirect online shopIn these challenging times, when many component manufacturers are actively reducing their finished goods stockholding, Vero Technologies is going against the trend by investing in developing its online web shop, VeroDirect, www.verodirect.com and increasing its stock levels. 
Schroff's cold aisle for data centres pays back in weeksSchroff UK has developed a range of modular standard components to create cold, or hot, aisle contained areas between rows of server housings. Significantly improving the thermal efficiency within data centres, the range of doors and top cover mounted sealing panels can be fitted to any new or existing cabinet installation, irrespective of the rack manufacturer. 
Brochure focuses on complete enclosure systemsNew from electronics packaging specialist Schroff is a 16-page, full-colour brochure detailing the company's capabilities for producing complete enclosure systems, which typically comprise a subrack or case, backplane, power supply, cooling unit and system management module. 
Mobile Enclosures for Touch Screen TechnologyIn response to the development of more mobile and independent electronic devices, and the growing use of touch screen technology, with graphical interfaces rather then traditional keypads, OKW have developed the new INTERFACE-TERMINAL enclosures. 
MicroTCA cubes offer cost-effective solution for industrial controlSchroff has introduced a new family of compact MicroTCA cubes, which are designed to enable users to create cost-effective systems for industrial control. In many such applications, there is no need for either full redundancy or many of the system management functions defined in the MicroTCA standard, so Schroff has developed the cubes to minimise costs while retaining the functionality required for the use of conventional AdvancedMC modules. 
Vero's plastic enclosures get colourfulVero Technologies has added six new colours - red, yellow, blue, green, black and brilliant white to the standard options available for all models in its plastic enclosures family. Moulded in flame retardant ABS, the enclosures are designed for a wide range of applications, ranging from hand-held instruments, remote controllers, flying lead machine controllers test and measurement equipment, machine and robot controllers, detection equipment, data logging units, desktop peripherals to many other uses where stylish, high quality plastic enclosures are required. 
Ultra Lightweight Metal Hand-Held Enclosures from OKWTEKO has introduced the new TEKMAG range. These new IP 67 hand-held cases are manufactured in TEKNIUM a magnesium based alloy with super strength, ultra lightweight and high shielding characteristics. This is the first time such a material has been used on a standard enclosure, and ensures suitability for very high tech applications such as industrial automation, medical, avionics, marine and automotive equipment. 
Brochure outlines electronics packaging solutions for railway applicationsElectronics packaging specialist Schroff has published a new brochure detailing the company's wide range of enclosures and embedded systems for use in railway applications. The 28-page A4 brochure starts with an overview of Schroff's capabilities and illustrates the typical locations where its products are found, such as inside trains, trackside, in signal boxes and at stations. 
EMC gasket for AMC modules features patented triangular profileWorking in collaboration with a partner company, Schroff has developed a self-adhesive fabric gasket with a triangular profile that has been granted a patent by the European Patent office. Specifically designed for narrow gaps, the new gasket profile is now being used on shielded versions of Schroff's range of AdvancedMC modules, which are compatible with both AdvancedTCA and MicroTCA systems. 
Rittal’s Air Management System eliminates escaping airflow to keep electronics coolRittal has introduced a range of AdvancedTCA and MicroTCA air management systems to enhance the cooling performance in ATCA and µTCAshelves. Due to steadily increasing power demands, heat output is on the rise. To ensure that any crucial cooling airflow is not wasted by escaping from any unused slots in the chassis, Rittal has developed a filler panel which acts as a barricade to prevent any valuable unused cooling air from escaping. 
Desktop enclosure for standard Eurocards from VerotecThe LBX from Verotec is a solution for users who need to mount standard Eurocard sized PCBs and modules in a desktop enclosure. Fabricated in steel, the LBX is sized to accept 3U and 6U boards in both 160 and 220mm board depths and can accommodate standard front panels in the popular 4, 6, 12 and 24HP widths. 
19in Plug-in units from Schroff feature slide-in cover plates for quicker assemblyElectronics packaging specialist Schroff has launched a family of 19in plug-in units that feature a slide-in cover plate, providing a significant reduction in assembly time compared with screw-on cover plates. Known as Frame-type plug-in unit PRO, the new range is designed to protect PCBs from mechanical damage and electrostatic discharge while maintaining the airflow necessary for effective thermal management. 
Sloping-Front Enclosures from OKWIn developing the new 'UNITEC' range, OKW has designed an enclosure system that can be used for face-to-face applications, for example a doctor with a patient, or a sales person with a customer. The cases have two inclined operating panels at right angles to each other which allow simultaneous input of data on one side, and readout on the other. 
Sealed IP67 enclosure range from BulginBulgin's new range of IP67 rated plastic enclosures combine a host of practical features to provide a unique package ideal for applications such as control stations and electrical & electronic control equipment where protection from dust and water is necessary. 
Soft-Touch Sealed Remote Control Enclosures from OKWThe new TEKO 'OV-IP' enclosures have been designed for small RF or infra-red remote control devices which are fitted on a key ring. These modern and highly tactile cases are manufactured using the latest dual shot moulding technique, combining grey ABS with black 'soft-touch' rubberised TPE. Each case consists of a single moulding which is folded over at the key ring end and secured by two self tapping screws, thus providing a high protection class of IP 65. 
Rittal’s TopConsole combines pedestal, desk unit and consoleRittal's new TopConsole offers a universal workstation comprising of three modules: pedestal, desk unit and console from which a tailored interface between man and machine can be created. New features of the TopConsole include an additional 600mm compact version, 10% of extra space for installation within the lid and new mounting plates that can incorporate 400mm variants. Flexible and adaptable, the new TopConsole range also includes new partial mounting plates available as extras in 200 and 500mm widths that can be bay-fitted together to suit any installation requirement. 
MicroTCA development system from SchroffSchroff has expanded its range of MicroTCA products with the addition of a versatile 8U development system that can be used as a rack-mount unit or easily converted into a desktop version. 
Schroff products conform to latest IEC standard for 1U chassisSchroff has announced that the 1U versions of its multipacPRO chassis and CompactPCI and VME64x systems all conform to the new IEC 60297-3-105 standard for 1U-high 19in chassis. Covering 'Dimensions and design aspects for 1U chassis', the IEC 60297-3-105 standard defines three types of 1U-high chassis: Type A are connected to the 19in. cabinet or frame at the 19in. front panel only, Type B are connected to the 19in. cabinet or frame at the 19in. front panel and are further reinforced by means of slide rails, and Type C are connected to the 19in. cabinet or frame via telescopic rails. 
Enclosures designed specifically for PV applications from SpelsbergPV is now a rapidly growing market, with new technologies being developed almost daily. Providing a new range of integrated enclosures which are certified to international standards with ingress protection up to IP68, Spelsberg is one of the leading companies for developing specialised enclosures for photovoltaic panels. 
Pocket sized enclosures from OKWThese pocket size 'OVO' enclosures from TEKO are designed for the latest hand-held electronics, and feature advanced ergonomics for comfortable handling and operation of the controls during use. Applications will include RF and infra-red remote control units as well as controller devices connected via a cable. Schroff launches personalised customer portal with online shopSchroff has launched a customer portal, mySchroff.com, which will be of interest to anyone involved in specifying products such as cabinets, subracks, cases, backplanes, power supplies or complete bus-based systems. 
Shortform brochure provides overview of enclosure productsElectronics packaging specialist Schroff has produced a shortform guide to the company's comprehensive range of products and services. Providing an ideal starting point for anyone involved in specifying electronics enclosures or related technology, the 32-page A4 Product Overview highlights the main technical specifications and key features and benefits of each product. 
Baying Kit for Rittal EnclosuresRittal's AE wall boxes can now be installed as a suite with the introduction of the new AE Baying Kit. Available for AE enclosure sizes from 800mm high to 350mm deep, the new kit comes complete with screws and nuts for rapid assembly eliminating the need for thread-tapping, while ensuring the correct compression of the permanent seal. A self adhesive universal seal is also supplied, along with bayable sealing elements and corner pieces allowing the adaption of individual enclosures. 
Schroff cuts costs and time-to-market for Airspan WiMAX base stationAdvancedTCA systems supplied by electronics packaging specialist Schroff have helped to reduce the development costs and time-to-market of the latest flagship WiMAX base station from Airspan Networks Inc. 
Die-Cast IP 66 Enclosures from OKWThe 'conFORM' enclosures, from ROLEC, are specially designed to protect highly sensitive electronic components against radio frequency interference. The enclosures have been EMC performance tested by Hanover University in Germany. 
Wall Cases from OKWOKW has extended the 'DIATEC' range of wall mounting enclosures with two new models moulded in lava (dark grey) ABS. The new models are particularly suitable for wall or machine mounted applications for example machine controllers, door entry systems, time loggers, detections systems, communications devices, and medical equipment. 
Austin Hughes 1U keyboard and drawer unit is SUN compatibleAustin Hughes Europe has introduced the new NS series slimline 1U LCD and keyboard drawer unit available with either 17 or 19 Samsung Class 'A' LCD panels. The 19 rack drawer is fully compatible with the SUN Micro Native LCD resolution of 1152 x 900, and the full SUN-compatible keyboard provides a trackball, a 104-key notepad keyboard with full numerical pad and SUN function key support including Stop, Cut, Paste and Compose. 
IP 67 Die-Cast Enclosures from OKWWith the 'aluCASE' range, ROLEC seems to have answered many of the criticisms of standard off-the-shelf die-cast enclosures. These high performance IP 67 enclosures have been developed using modern, so called intelligent design principles. 
Multi-coloured enclosures from SpelsbergSpelsberg's latest IP55 enclosures come in a selection of new colours (Grey, Red, Green and Black) - that can be used to match, or stand out from virtually any environment. With Spelsberg's unique self-sealing cable entries and 'Klickt' click-top system this low cost enclosure's ingress protection has been increased to IP55. The new range of colours, coupled with the popular 'A' box's facia, means the enclosure are aesthetically pleasing as well as practical. 
Hand Controller Enclosures with Trigger ActionOKW have added two new models to the unique 'SENSO-CASE' series of hand controller enclosures. These new models have an integrated push-button switch, in the natural trigger position on the underside of the case, which ensures logical fatigue free operation of the unit for activation and logging functions. Typical applications will include measuring and control units, machine and robot controllers, stock and sales logging equipment, medical and laboratory technology and opto-electronics. 
Keypad Enclosures from OKWTEKO has extended its popular TEKBOX range of enclosures with new sloping front keypad versions which have been designed for desktop or hand-held electronics. Typical applications will include data entry keypad devices for point-of-sale, medical, computer, and test and measurement equipment. 
1U intelligent fan trays from VerotecVerotec has extended its range of 19 1U standard fan trays. Two depths are available, a 250mm deep unit fitted with three fans and a 350mm deep unit with six fans. All sizes are offered with a choice of 12, 24 or 48 VDC fans or 115 or 230 VAC fans, and each unit is available with or without a replaceable filter. Each DC fan is rated at 170 m3/h, the 115 VAC fans at 180 m3/h and the 230VAC fans at 160 m3/h. Hand-Held case from Vero takes wide displaysVero Technologies has introduced a new size of its popular and stylish Veronex hand-held case family, sized to accept today's industry Character and Dot Matrix standard display modules. The maximum viewable width of the display is 70mm with an 82.5mm PCB, enabling the great majority of units from the leading manufacturers to be housed. The new hand-held unit measures 150 x 90 x 30 mm; the top cover is furnished with a recessed area to accept a 70 x 137 mm membrane keypad. Handle facilitates hot-swapping of AdvancedTCA and MicroTCA boardsSchroff has introduced a new hot-swap-capable handle for the insertion and withdrawal of AdvancedTCA carriers and MicroTCA mid-size modules. 
Low Cost IP 66 ABS Enclosures from OKWThe ROLEC 'technoBOX' range features an attractive modern design including a bevelled lid, clean lines and easy assembly, all at very competitive prices which start at just £6. 
Aluminium Instrument Enclosures from OKWMETCASE has extended the 'MINIMET' range of aluminium instrument cases. These compact enclosures have been designed for desktop and portable electronics. Typical applications will include test and measurement systems, medical and wellness devices, laboratory equipment, switch boxes, peripherals and interfaces etc. 
Compact new MicroTCA system allows horizontal board mountingSchroff has expanded its MicroTCA product range with the addition of a compact system designed to allow horizontal mounting of AdvancedMC modules. 
DIN-Rail Mounting for Open PCB Assemblies from OKWOKW has extended its 'RAILTEC' range with a line of DIN-Rail PCB interface supports. These have been designed to allow open PCB assemblies to be mounted in a control cabinet using the standard DIN-Rail system. Typical applications will include factory automation, building and safety systems, heating and air conditioning units, automatic timers, sensors, relays and signal distribution. 
Desktop case from Schroff can be tailored to user’s requirementsSchroff is now offering its versatile ratiopacPRO range of desktop cases with a new modification service that enables them to be tailored to meet customers' specific requirements. While the ratiopacPRO range includes a wide variety of standard products, sometimes drilling or cut-outs are needed at particular places or screen printing or a special colour finish may be required to satisfy the exact demands of the application. 
Versatile Keyfob Enclosures from TEKOTEKO has introduced the 'POCKET 11' series keyfob style enclosures. These versatile housings have been designed for remote control devices. Typical applications will include RF and infra-red remote control systems, personal security devices and door access equipment. EMI/RFI vents for wide range of applicationsAerco supplies a comprehensive range of honeycomb EMI/RFI vents from P & P Technology. These top quality vents are ideal for commercial enclosures, screened rooms, military applications and shelters where high attenuation is required across a wide frequency range. Versions are available for TEMPEST and EMP applications. High precision custom-built CNC drilling machines are used to manufacture P & P honeycomb attenuation vents to ensure best possible quality and accuracy. Vented Size 12 Enclosure from CamdenCamden Electronics has added a new vented version of its latest size 12 enclosures to its versatile modular DIN rail mounting family for applications requiring additional heat dissipation. 
Spelsberg els UK's cable glands alternative said to be 90% faster to fitSpelsberg els UK has extended its range of enclosure accessories to include three new grommet seals from Swedish manufacturer TST. The range includes a basic gland seal, the TSS grommet for less demanding low-cost applications, the rubber based Rutaseal and the innovative Klikseal locking grommet. All three are push-fit designs and so are very quick to install, taking 90% less time than a conventional cable gland, they also provide ingress protection to IP67 and cost also considerably less than a traditional plastic cable gland. 
Rittal adds to its MicroTCA familyRittal has expanded its MicroTCA product range with the addition of an MTCA Cube. The Cube offers a simple, efficient architecture capable of handling up to 6 AMCs and an MCH (MicroTCA Carrier Hub), plus the resources required to power, cool and support them. 
19in racks always immediately available from SurtechSurtech Distribution, the enclosures and accessories specialist, has announced a new service whereby customers can always be assured of next day delivery on the Imrak 1400 range of 19in multi-application racks. The company is committed to holding a minimum of £200 000 worth of Imrak 1400 stock at any time and can arrange next day delivery. 
Hammond takes equity stake in Taiwan manufacturer Ritec EnclosuresHammond Manufacturing, a leading manufacturer of moulded, die-cast and metal enclosures for the electronics, electrical and allied industries, has taken a significant equity participation in Ritec Enclosures, an ISO 9001 approved Taiwan-based manufacturer of similar products. 
Versatile and Ergonomic Keypad Enclosures from OKWOKW has introduced the 'COMTEC' range of sloping front keypad enclosures. These modern enclosures feature an attractive 'softline' design with an ergonomically inclined (10º) operating area, which guarantees comfortable operation of the controls. 
New CompactPCI subrack system uses lateral heat flowSchroff has introduced an 8-slot CompactPCI subrack system that has been specifically designed to allow 6U boards to be mounted horizontally within a 4U-high shielded enclosure. Fully compliant with the PICMG 2.16 specification, the 19in. system utilises a hot-swap fan unit with four fans to provide lateral heat flow from left to right through the unit. 
Enclosures conform to DIN and IEC standards for 19in equipmentMETCASE has launched its 'INSTRUMET' 19in case range. These stylish, versatile and light weight enclosures conform to the DIN and IEC standards for full and half width 19in equipment, and will accept standard 3U subracks and chassis. Typical applications will include test and measurement devices, communications equipment, medical equipment, laboratory systems and much more. 
Water-cooled cabinet is ideal for SME server applicationsNew from Schroff is a water-cooled server cabinet that has been designed for use in a normal office environment and is therefore likely to be attractive to small and medium-sized enterprises or any other organisation without a separate air-conditioned computer room. 
Versatile desktop and caseframe enclosures from VerotecThe comprehensive range of elegant Diplomat 19 and half-width desktop cases, 19 vertical and horizontal caseframes from Verotec offers outstanding versatility and thermal management. Available in 3U, 4U, 6U and 9U heights and depths of 322, 422, 522 and 622mm, the Diplomat is equally suitable for use during system development and as a housing for production status units. 
‘Easy-Mount’ Plastic Enclosures from TEKOThe TEKO 'Smartbox' range offers electronics engineers a versatile and low cost housing solution. These universal enclosures are available with external mounting ears which allow fast mounting to walls, machines, furniture or any vertical or horizontal surface, without the need to open the case. Typical applications will include remote sensing and detection devices, RF equipment, switching units, security devices and connection nodes. 
Gel filled enclosure system protects electrical junctions from floodingTelford-based enclosures specialist Spelsberg ELS UK has launched its new Abox GT range of extreme environment electrical enclosures. The new range uses an extremely durable and easy to use gel fill system to protect electrical connections even after prolonged exposure to water, soil, sand or grit. The IP68-rated enclosure system will even withstand extended periods of total immersion. 
Networking cabinet provides wide choice of cable-management accessoriesSchroff has introduced a networking cabinet that can be specified with a comprehensive range of accessories to enable the implementation of an orderly and reconfigurable cable management solution. Known as Varistar NET, the new cabinet uses a closed rolled-steel frame construction that not only provides a high load-bearing capacity but also has smooth, rounded edges to prevent damage to Cat 6 and optical-fibre cabling. 
Guide outlines AdvancedTCA, MicroTCA and AdvancedMC packaging solutionsElectronics packaging specialist Schroff, one of the leading members of the PICMG consortium, has compiled a new 88-page guide to the AdvancedTCA, MicroTCA and AdvancedMC open computing specifications. These emerging standards were originally developed for the telecoms market and are now gaining momentum in other industry sectors where high availability and high data transfer rates are key requirements. 
19in clip-in blanking panels cut installation timeSchroff has launched a range of plastic clip-in blanking panels that provide a quick and easy way to prevent hot air from recirculating through the gaps between equipment mounted in a 19in. cabinet. 
Elma moves to new 30,000 sq. ft. green field facilityElma Electronic, manufacturer of commercial, ruggedised and COTS enclosures, subracks, backplanes and systems, has moved into a new 30,000 sq. ft. purpose-built green field facility in Bedford. The new facility brings together under one roof the Elma Electronic commercial products business, which has relocated from Hampshire, and the Mektron Systems ruggedised systems business. 
Outdoor enclosure heaters protect against temperature fluctuationsFor enclosures, which are situated outdoors, Rittal has introduced a range of heaters to protect the electronics housed within from any temperature fluctuations. Available with 400W and 800W outputs, the heaters prevent the temperature inside the enclosure from dropping below operational level. 
Extended Range of Extruded Aluminium EnclosuresTEKO have extended the TEKAL range of extruded aluminium enclosures. These versatile housings have been designed for hand-held, desktop and wall mounted electronics. Typical applications will include mobile data recorders, test and measurement devices and control equipment. 
AdvancedTCA and MicroTCA systems pass shock, vibration and earthquake testsSchroff has announced that its range of AdvancedTCA and MicroTCA chassis systems have undergone and passed rigorous testing at an independent laboratory to confirm their stability under extreme shock, vibration and earthquake conditions. With these open computing standards beginning to attract the attention of users in the industrial, transportation and defence sectors, it has become essential for systems to be able to cope with the most demanding of environments. 
Translucent ice-blue 1591XX ABS small enclosuresHammond Electronics has introduced Ice Blue translucent versions of its latest 1591XX Series small instrument housings. The plastic is translucent to blue, white and near white LEDs, readouts and displays, enabling them to be mounted inside the enclosure, reducing configuration costs because cutouts will not need to be machined. 
Rittal's Technical Support Tool – a Configurator for HMI EnclosuresRittal has introduced its latest technical support tool, the Comfort Panel Configurator. This new tool allows the configuration of individual prototypes for the Human Machine Interface (HMI) to be performed with ease, by utilising a simple selection process. On completion of the configuration a visual presentation and 3D CAD model can be displayed, in the format of choice, which can then be imported into machines or plant design. 
Rugged receiver enclosures from RF Solutions deliver IP68 rated, waterproofed solution for outdoor applicationsRF Solutions has addressed the growing number of outdoor applications that require wireless remote control with the introduction of its new IP68 rated enclosures that provide an unmatched degree of protection against moisture ingress. 
New Industrial Enclosures CatalogueROLEC has published its comprehensive catalogue detailing its range of industrial enclosures which are designed for electrical and electronic applications. For the first time all the product sections have been combined into one easy to use handbook. This 236 page colour catalogue provides design and installation engineers with a great source of high performance enclosures with specifications from IP 54 to IP 69K, The ordering information, drawings, material specifications and customising options are all set out in a clear and easy to use format. 
Rack Extinguisher System from RittalBy actively and continuously monitoring the air within the protected enclosure for smoke aerosols, the new Rittal rack extinguisher system Detection-Active (DET-AC) can offer early detection of fire sources. DET-AC is equipped with a multi-stage smoke analysis extraction system, which triggers extinguisher actions if required thus providing direct fire protection for valuable hardware and data. 
Extra Large ‘SOFT-CASE’ EnclosuresFollowing customer demand, OKW have extended their innovative 'SOFT-CASE' enclosures with the new size 'XL' series. These new models have been designed for larger mobile electronics. Typical applications will include hand-held instrumentation, medical devices, mobile data logging and data capture equipment and much more. 
Diplomat DC impellers withstand the pressureThe Comair Rotron Diplomat range of high power, backward curve impellers, available in the UK from Aerco, has been extended and now includes AC blowers for the first time. Ideal for pressurisation or evacuation of enclosures in a variety of applications the range provides high airflow in high-pressure environments and range in size from 100mm to 280mm. These blowers provide airflow of up to 472litres/sec (1000 CFM) against a system pressure of up to 3 inch H2O. DC versions are available in 12, 24 and 48V while the AC blowers are 115 or 230V. 
Non-Metallic enclosures for a range of tough environmentsSpelsberg has launched a range of durable non-metallic enclosures for electrical junctions and instrumentation protection in demanding environments. Originally developed to house sensitive electrical installations in tough petrochemical applications, the Stahlin J Series range of rugged glassfibre-reinforced polyester (GRP) enclosures has now become a versatile solution for any application that calls for a high degree of protection from corrosion or other environmental conditions. 
IP 54 Display Enclosures from OKWROLEC's advanced 'aluDISPLAY' enclosures have been designed for slim line displays and control panels. The enclosures can be used as portable units, wall mounted, or fixed to a suspension arm system. Typical applications will include machine controllers, medical equipment, information terminals, display systems and process control units. The 'aluDISPLAY' enclosures consist of a contoured case extrusion, two die-cast end panels, a screw-on front panel and two front panel cover extrusions. Three standard sizes are offered: 333 x 224 x 61 mm, 352 x 284 x 61 mm and 412 x 344 x 61 mm. The cases can also be specified as standard units, or with pivoted wall mounting brackets, or with a coupling tube for mounting on a suspension arm system. 
Subracks can handle extreme shock and vibrationNow available from Schroff is a range of 19in. subracks that can withstand the most rigorous and demanding environmental conditions, particularly where equipment is subjected to extreme levels of shock and vibration. 
Outdoor enclosures from Rittal protect against the elementsRittal has introduced a series of enclosures, the CS Toptec outdoor range, which has been specifically designed to safeguard the internal components from the external environment. Built around a stainless steel frame, based on the leading TS 8 enclosure, the housings are clad with twin walled sides, fastened securely from inside, with double skin doors front and rear for serviceability. The double walled sides and door also provide an effective barrier against condensation, which tends to form on the coldest internal surface (the inside of the outer wall), which is then discharged through the bottom edge of the panel. 
ABS Enclosures have larger battery compartmentsDue to customer demand, TEKO has extended its popular range of 'TEKNET' ABS enclosures with the new 'B2' models which have larger battery compartments. Typical applications include in-field test and measurement instruments, medical devices, data loggers and much more. 
Catalogue features Aluminium EnclosuresMETcase has published their new 2007 Aluminium Enclosures Catalogue which details their comprehensive range of desktop, portable, wall mounting and 19in enclosures. This 28 page colour catalogue provides design engineers with an invaluable selection of modern, versatile and cost effective aluminium housings. The ordering information, drawings, material specifications and customising options are all set out in a clear and easy to use format. 
Surtech signs enclosures specialist RittalSurtech Distribution has signed a distribution agreement with Rittal during their recent Now Open Your Mind distributors' seminar at Hellaby, Rotherham. Initially covering the Ripac 19 subrack range, Surtech will offer full technical support, design assistance and commercial support for the range; extensive stock holding will continue the company's well-deserved reputation for high quality service. 
Enclosures with belt/wall clip accessoryOKW has introduced a new belt/wall clip accessory for their 'SOFT-CASE' series which allows the enclosures to be worn on a belt and then stored on a wall, or in a cabinet, after use. With this new accessory part the enclosures can be used for mobile electronics that are worn by a series of users and then returned to a store area after a given period, for example data logging, inventory management, medical and wellness devices, guided tour systems etc. 
Catalogue has 200 pages full of enclosuresTEKO is published its new 2007 enclosures catalogue which details their comprehensive range of plastic, aluminium and steel electronic enclosures. This 200 page colour catalogue provides design engineers with a great selection of versatile and cost effective off-the-shelf enclosures. The ordering information, material specifications and customising options are all set out in a clear and easy to use format. 
Schroff's 1200mm-deep server cabinets offer ample space for cablingSchroff has expanded its Varistar Server range of cabinets with a new series of 1200mm-deep models that have been designed to provide ample space for both front and rear cabling. Capable of accommodating servers from all leading manufacturers, the cabinets offer a spacing of 740mm between front and rear panel mounts, with a 120mm gap at the front for patch cables and a 340mm gap at the rear for power and data cables. 
Test fixtures and enclosures from Clare eliminate shocksThe risk of an electric shock during product testing is completely eliminated with the latest range of test fixtures and enclosures from electrical safety testing specialist Clare Instruments. The range enables the operator to carry out the safe and controlled electrical testing of a wide range of products within the production and laboratory environment, complying with the requirements of EN 50191 – Erection and Operation of Electrical Test Equipment. 
Rittal's TopConsole will help man interface with machineFollowing extensive research and development, Rittal has announced the launch of TopConsole, a new range of HMI units designed to meet the modern demands of the human/machine interface. 
VME64x system for use in tough environmentsSchroff has introduced a new 12-slot VME64x system that is aimed at applications in demanding environments where the use of COTS equipment is becoming more prevalent, particularly in the transportation and military sectors. Designed to accommodate 6U-high boards vertically in a 7U-high 19in. shielded subrack, the new system provides 12 front slots for 160mm-deep boards, as well as three rear slots for 4HP transition modules. Enclosures For Electrical Junctions and ComponentsSpelsberg els UK has launched a new range of enclosures with a simple clean design and tough materials for general purpose housing of electrical junctions and components. The Norma range offers electrical fitters, distribution companies and OEM manufacturers access to a no-nonsense range of Polycarbonate and ABS plastic enclosures that provide ingress protection to IP65, UV protection and mechanical protection from impacts. 
Miniature Aluminium EnclosuresTEKO has launched its new 'MINITEKAL' range of miniature aluminium enclosures. These versatile and robust housings have been designed for easy assembly of the electronics. The all aluminium design allows good levels of EMC protection to be implemented. Typical applications will include small hand-held measurement devices, low power Radio equipment, power supplies, peripherals, monitoring systems and detection devices. Due to their small size, 'MINITEKAL' cases can be used as independent units or located in control cabinets. 
Solid subrack protects in extreme conditionsRittal has extended its series of subracks with the introduction of the 19in Ripac Solid, a robust subrack which offers high mechanical stability to protect electronics in extreme conditions. Specifically designed to provide stability, Ripac Solid ensures smooth and continuous operation of the whole system especially when exposed to extreme loads such as constant acceleration and environments with permanent vibrations. Spelsberg IP66 TK enclosures specified by WatersaversUK company Watersavers is using IP66 TK enclosures from Spelsberg to house the controls for the company's new SOV-100 automatic water shut off system. The system has been designed with BREEAM guidelines in mind and can save thousands of pounds every year in reduced water wastage. The Spelsberg enclosures satisfied a long list of requirements, from transparent lids in order to view status LEDs through to PCB mounts, extra wiring space and an aesthetic exterior that would suit smart commercial premises. 
Four new standard colours added to the ergonomic 1553 soft-sided enclosure familyHammond Electronics has extended its ergonomically shaped and tactile hand-held 1553 family, adding four new standard colours, translucent blue, red, safety yellow and black. Moulded in general purpose ABS, the units will typically be used for hand-held instruments, remote controllers, flying lead machine controllers test and measurement equipment, machine and robot controllers, detection equipment, data logging units, peripherals and many other applications where a stylish, easy to hold enclosure is required. 
Versatile and Stylish Versamet 19” Rack CasesOKW's METcase™ division have launched the new VERSAMET 19" rack cases, which conform to the DIN and IEC standards for 19" equipment, and are suitable for both rack mounted and desktop equipment. Typical applications will include test and measurement devices, audio and video systems and networking and communications equipment. 
Rittal RiLAN Industrial Enclosures for reliable Ethernet connectionsRittal RiLAN Industrial enclosures provide a reliable basis for the exchange of information and data by offering an integrated Ethernet distributor concept specifically designed to accommodate the growing level of decentralisation. RiLAN industrial enclosures offer flexible plant structures, greater efficiency, enhanced security via information exchange simplification as well as enhanced process co-ordination and security monitoring. The enclosures can be individually configured to suit specific requirements. 
New open-frame rack for audio-visual and broadcast applicationsSchroff has introduced a new version of its popular Minirack 19in. cabinet to meet the requirements of users in the audio-visual and broadcast (AVB) industries. Featuring an attractive design finished in RAL 7021 black, the AVB Minirack is supplied as an open-frame unit to allow quick and easy access to equipment and cabling. 
Enclosures for indoor applicationsOKW has extended its 'ART-CASE' series with twelve new models. These enclosures have been designed for modern indoor electronics and typical applications will include transmission and reception units in building services, medical equipment, peripherals and security devices. The new models include newly designed screw-on access plates on the base section, which provide easier access to the battery compartment to replace the cells, or access to the electronics for servicing and calibration. 
AdvancedTCA systems allow horizontal mounting of boardsSchroff has expanded its portfolio of AdvancedTCA products with a new range of compact 2- to 5-slot systems designed to allow modules to be mounted horizontally. Aimed at both the development environment and enterprise solutions, the new range of AdvancedTCA systems incorporates hot-swap capable fan units with a cooling performance of 200W per front board and 15W for the rear I/O area, while an independent fan controller enables the systems to be operated without shelf management. Configured for 19in. assembly and featuring built-in EMC shielding, the new systems are available in a choice of four standard configurations. 
Hand-held enclosures get rubber protectionOKW has extended the range of rubber protectors for its 'DATEC-CONTROL' enclosures which are designed for housing hand-held electronics frequently used outside or in harsh indoor environments. Typical applications include test and measurement systems, controller devices and data loggers. 
Compact desktop case has integrated ventilation facilityThe new ratiopacPRO-air compact case from Schroff has been designed to provide a robust, EMC-shielded enclosure that is particularly well suited to applications in the instrumentation sector. Featuring ventilation slots on either side of the card cage, the case ensures optimum airflow over plug-in units to aid the thermal management of high-density electronics. 
Rittal Launch new Hygienic Design ‘HD’ Enclosure RangeRittal have introduced a new range of enclosures specifically designed to facilitate the constant battle against deposits accumulating on enclosure surfaces, crevices and recesses helping eliminate any potential contaminants, which could negatively impact on customer production. 
Densitron & LoGi Partnership adds plastic enclosures to the mixDensitron Display Solutions has entered into an exclusive partnership with LoGi Engineering PTE Ltd, a plastics engineering company with facilities in Malaysia and Singapore, to offer plastic enclosures as part of its complete solutions service. 
Verotec acquires the desktop enclosures business from APWVEROTEC, www.verotec.co.uk, a UK-based company newly created by two ex-APW senior managers, Tim Armstrong and Mel Young, has purchased the metal enclosures standard product lines from the APW receivers. Manufacturing of all items is underway in a new facility from the original tooling, guaranteeing continuity of supply. Such well know brand names as the APW / VERO KM6-II subracks and accessories, Diplomat, LBX, Verotec Case, 1U fan trays, 19 Rack Case, Commsrak, slimline wall box and many others are back in full-scale production, enabling companies who had designed-in the products to continue to purchase. 
Die-Cast Aluminium Hand-Held EnclosuresROLEC has launched its IP 66 'handCASE' enclosures which are fully styled hand-held enclosures made from die-cast aluminium rather than ABS plastic. As a result, these enclosures are robust, and offer a high degree of EMC protection as standard. However, they are also ergonomically styled and offer an equally attractive design to other plastic enclosures on the market. 
Quiet rack air-conditioning unit keeps its coolRittal has introduced a low noise TopTherm Plus rack air-conditioning unit ideal for office environments. The units are of integral design and contain specially designed low noise fans, which alleviates the comparably more expensive option of water-cooling with an external chiller. Units are currently available for applications up to 750W. 
Pocket size plastic enclosuresTEKO has launched its new 'MINITEKNET' plastic enclosures. These compact and ergonomic hand-held cases have been designed for the latest pocket size electronics. Typical applications will include RF and infra-red remote control units, medical and wellness equipment, detection devices, measurement systems, and personal security equipment etc. 
LAIRD TECHNOLOGIES INTRODUCES DECORATIVE METALS TECHNOLOGYLaird Technologies today introduces its decorative metals technology. Metal stamping is a core Laird Technologies' competency and the decorative metals technology is drawing from that. This technology, along with the company's core competencies, allows the company to be a single source supplier for all types of precision metal stampings saving customers time and money. 
Surtech agrees supply contracts with new owners of APW product linesSurtech Distribution, the Andover-based specialist distributor of enclosures, previously a major direct APW distributor, has announced that following the failure of APW, ongoing supply agreements have been agreed with the four separate companies who have purchased the IPR for the major APW product lines. 
Catalogue features datacom, server and cabling cabinetsSchroff UK has brought out a new catalogue outlining its comprehensive range of cabinets, wall-mounted enclosures and accessories for use in datacom and networking applications. 
DIN-Rail Cases Allow Multiple ConnectionsOKW has extended its 'RAILTEC-B' DIN-Rail range of enclosures with a new series of models that allow different types of terminals to be accommodated within the same enclosure. RAILTEC-B cases are suitable for a wide variety of industrial electrical and electronic applications such as machine and process control and panel building. The enclosures conform to DIN 43 880, unit 1 and are fully insulated and protected to VBG4 as well as IEC529/DIN VDE 0470-1. 
Desk-top case for T&M applicationsSchroff UK has introduced a new version of its popular propac systems case. Known as propacPRO, it is particularly suitable for test and measurement applications and can be configured for use as a desk-top or portable case, accommodating 19in. or non-standard components and plug-in units. As well as featuring an updated design, propacPRO offers excellent RFI shielding for the protection of sensitive electronics and incorporates four ventilation grills in the base plate for effective thermal management. Vero Technologies purchases moulded enclosures business from APWVero Technologies has acquired all the moulded enclosure and card guide standard product lines from APW in administration, and manufacturing of all items has recommenced from the original tooling, guaranteeing continuity of supply. Such well know brand names as Veronex, IDAS, Apollo, General Purpose Box, Patina and many others are back in full scale production, enabling companies who had specified the products as the housing for their equipment to continue to purchase. 
Surtech provides continuity of supply for APW productsAPW UK Ltd, trading as APW Enclosure Solutions and Vero Electronics Packaging, well known in the market for the IMRAK, IMnet and IMserv racks, Diplomat cases, KM6 subracks and plastic enclosures, has been put into administration and has ceased to trade, causing considerable uncertainly. Surtech Distribution had a long-standing close relationship with APW, who referred the majority of orders below their OEM minimum to Surtech for fulfilment. 
MicroTCA subracks include backplane and shieldingSchroff has introduced a new family of subracks specifically designed for applications based on the emerging MicroTCA specification. As well as incorporating full RFI shielding, the subracks are equipped with a MicroTCA backplane providing eight full-size AdvancedMC slots, four compact AdvancedMC slots, two MCH slots and two power-module slots. Available in 3U height for single AdvancedMC modules or 4U for double AdvancedMC modules, the subracks have a depth of 200mm and can be specified in different versions for mounting into either 19in. (IEC 60297) or metric (IEC 60917) cabinets. 
Aluminium wall casesMETcase has launched the new 'DATAMET' range of aluminium wall cases. These stylish and robust enclosures have been designed for indoor wall mounted electronics. Typical applications will include control units, measurement systems, medical equipment, safety and security systems, communication devices, and machine controllers. 
Wall or machine mount enclosuresOKW has extended its range of 'DIATEC' enclosures with two new models with hinged transparent lids. The new models are particularly suitable for wall or machine mounted applications where the controls and displays need to be clearly seen, but also protected from accidental operation or contamination, for example with machine controllers, door entry systems, time loggers, detections systems, communications devices, and wellness and medical equipment. 
Aluminium instrument cases allow for fast installationTEKO has launched its 'TEKAM' range of aluminium instrument cases. These enclosures have been designed for fast installation of the electronics. The all aluminium design allows good levels of EMC protection to be implemented. Typical applications will include hand-held test and measurement devices and Radio control equipment, plus wall mounted monitoring systems, security devices and building control equipment. 
Hand-grip style enclosures from OKWOKW has launched the 'SENSO-CASE' series of hand-grip style enclosures. These ergonomic hand-held cases have been designed for single handed operation of the controls on the top section of the unit. Typical applications will include measuring and control units, machine and robot controllers, stock and sales logging equipment, medical and laboratory technology and opto-electronics. 
Extruded aluminium enclosuresThe popular 1455 family of extruded aluminium enclosures from Hammond Electronics has been extended with the addition of the A and B sizes, slimline units designed to accept one or two circuit boards respectively, mounted horizontally directly into slots in the walls of the unit. 
Lightweight low voltage link box is easy to installA new low voltage 2 and 4 way link box for connecting and switching underground low voltage cables has recently been introduced by B&H, part of Tyco Electronics - Energy Products division. A patented modular assembly integrates single resin casting, snap-fit terminal cover, diving bell lid, and pit enclosure. This new modular concept significantly reduces the weight and size of the new link boxes, making them easier to install in areas where space is at a premium, while also reducing excavation and reinstatement costs. 
Desktop cases from Schroff are pre-configured for PXI instrumentationSchroff has introduced a new series of desktop cases that are supplied fully configured for use in PXI-based test and measurement applications. Using the proven technology of Schroff's ratiopacPRO case, the new PXI complete systems are available in a choice of four versions designed to accommodate 8, 14, 18 or 21 PXI boards. 
New Soft Cases from OKWOKW has extended its 'SOFT-CASE' series with the new sizes S and L. They have also added two new standard colours, infra-red PMMA material and an increased selection of intermediate rings. 'SOFT-CASE' hand-held enclosures have been designed to enhance the visual impact and tactile quality of small electronic devices. Typical applications include measurement systems, wireless RF or infra-red remote control devices, medical and laboratory equipment, and peripherals and interfaces. 
Fully welded equipment chests from StrongboxStrongbox all-steel, fully welded equipment chests, designed to provide a rugged and low-cost, portable housing at a fraction of the price of a standard instrument rack, are now available in a range of wood grain effect finishes that make them ideal for environments where aesthetics are important. They are likely to be used in applications such as broadcast production suites and as housings for music systems in bars, clubs and other entertainment establishments. 
Versatile Metal ‘DISSIPATOR’ Enclosures from TEKOTEKO have introduced the 'DISSIPATOR' enclosures series. These versatile metal enclosures can be used for housing desktop and rack mounted electronics. Typical applications will include test and measurement devices, professional audio systems, and laboratory and communications equipment. 
Easy Handling ‘METTEC’ 19” Rack Cases from OKWOKW has introduced the 'METTEC' 19" Rack cases, which are manufactured by their METcase™ division. These versatile enclosures feature an attractive front bezel which incorporates unique 'comfort handles' for easy handling. Typical applications will include networking and communications equipment, industrial computers, sound and studio systems, laboratory instruments and industrial control systems etc. 
Low-cost multipurpose enclosuresTEKO's 'COFFER' enclosures in an extensive range of sizes and versions. These low cost multipurpose enclosures have been designed for fast assembly of electronics and electrical components. Typical applications will include measurement devices, prototype systems, RF equipment, switch boxes, security electronics etc. 
Enclosures provide high performance IP 65 protectionOKW's 'SNAPTEC' enclosures provide high performance IP 65 protection class at economic prices. From around £4 each for 100 pieces, these cases also offer fast assembly times resulting in significant cost savings either during production, or later during routine maintenance. 
Extruded aluminium enclosures with integral heat sinkFollowing the acquisition of the West Hyde small enclosures business when it ceased trading, Hammond Electronics has re-introduced the seven-strong Sink Box range of extruded aluminium cases, designed for the horizontal mounting of PCBs or chassis. The four larger sizes are designed for the direct horizontal housing of 3U Eurocards, either 160, 220 or 280mm deep. 
Steel equipment chestsThe Strongbox range of all-steel, fully welded equipment chests is designed to provide a rugged and low-cost, portable housing at a fraction of the price of a standard instrument rack. 
Display ready IP65 enclosures are display readyOKW's 'DATEC-MOBIL-BOX' enclosures are designed for fitting standard LCD displays. These ergonomic hand-held cases are good for housing both indoor and outdoor mobile electronics. Typical applications will include data-collection units, medical and wellness devices, and test and measurement equipment. Website from Spelsberg supports Stahlin's enclosuresAfter recently announcing the introduction of the Stahlin range of electrical enclosures to the UK, Spelsberg has launched the www.stahlin.co.uk website designed to provide UK customers with an easy to use central point of information for Stahlin products and services available in the UK. 
Hammond buys Small Enclosure Business from West Hyde and Re-Launches Clipper Product RangeHammond Electronics has acquired the small enclosures business of West Hyde Enclosures which has ceased trading. Manufacture has now resumed in the UK from the original West Hyde tooling, giving continuity of supply for customers who had previously specified the enclosures. 
Mpatch open patching frame saves computer room real estateIMpatch, the latest development to be added to the innovative IMnet and IMserv family of dedicated networking enclosures from APW Enclosure Solutions, gives a future-proofed patching environment for both copper and fibre media. It extends the family's capabilities with the addition of an open frame design, which, because of the all-round access and lack of doors, saves significant computer room real estate compared with an enclosure. It provides outstanding cable management on both the backbone input and the integral front cable management arms on the patching side of the frame enable 100% patching to be achieved, again reducing real estate requirements. SPELSBERG LAUNCH STAHLIN ‘DIAMONDSHIELD’ RANGE OF TOUGH ENCLOSURES FOR OUTDOOR AND PROCESS APPLICATIONS.Spelsberg has launched the Stahlin DiamondShield range of fibreglass composite enclosures in the UK. Designed to house instruments, switchgear and cable junctions, DiamondShield out-performs equivalent plastic designs in terms of strength and corrosion resistance, while improving on metal alternatives in terms of weight, ease of modification, flexibility of mounting and durability. The DiamondShield range is now fully stocked by Spelsberg in the UK and is available in 10 sizes up to 508mm x 406mm x 254mm with more than 150 possible installation configurations. Versatile Plastic Hand-Held Case Includes Battery CompartmentEvatron has announced its EVA100-6A-RE series of hand-held plastic cases that will suit a wide variety of applications. They are available in either black or off-white. 
LAIRD TECHNOLOGIES UNVEILS AESTHETICALLY COLOURED FABRIC-OVER-FOAM SHIELDING GASKETS FOR ELECTRONIC SYSTEMSLaird Technologies, a leading designer and manufacturer of electromagnetic interference (EMI) shielding, thermal management, telematics and antenna solutions, responded to the changing needs of the consumer electronics market by unveiling its Aesthetically Coloured Fabric-Over-Foam shielding gaskets to complement the outside colour of a chassis. The gaskets are an alternative to standard EMI shielding options for consumer gaming products, home computers, entertainment systems and medical equipment. 
Die-Cast Enclosure Family ExtendedHammond Electronics' Eddystone thin wall range of die-cast aluminium enclosures has been extended with the addition of three sizes and a further two reduced height variants of existing plan sizes. The Eddystone range, which is said to provide excellent EMC performance and good mechanical protection for the housed components, now extends to 24 different models ranging in size from 50 x 50 x 25mm to 188 x120 x 82mm. 
Hybrid backplane eases migration to CompactPCI ExpressSchroff has introduced a new hybrid backplane that has been designed to facilitate the transition from CompactPCI to the new CompactPCI Express standard by combining the two bus architectures on to a single backplane. 
Enclosures for ATEX-rated environmentsSpelsberg has developed two new ranges of Ex rated enclosures designed to assist systems installers and equipment designers in meeting the ATEX requirements for zones 2 and 22 explosion endangered areas. The new Black Abox Ex, and TK Ex boxes offer moisture ingress protection to IP65 and IP66 respectively. Both employ tough reinforced polycarbonate bodies to protect electrical control and instrumentation systems from fire, dust, knocks and chemicals. Authorised for use in ATEX 100a applications by TUV Rheinland, the Ex enclosures are ideal for use in the process, manufacturing and offshore industries. 
Complete PICMG Micro TCA Systems from SchroffSchroff has introduced a range of complete systems to meet the requirements of the PICMG MicroTCA standard, which defines a system architecture that allows AdvancedMC mezzanine boards to be plugged directly into a backplane without a carrier board. 
COMPREHENSIVE NEW ENCLOSURES CATALOGUE FROM SCHROFFSchroff has announced the availability of a new edition of its comprehensive Electronics Packaging catalogue. With more than 850 pages, Edition 22 provides an indispensable source of information for anyone involved in specifying or purchasing electronics enclosures or related products and services. 
VME64x Tower Cases suit T&M SystemsSchroff has expanded its range of VME64x system cases with the introduction of two new tower versions suitable for use in test and measurement applications. 
Systems Integration Service Cuts Cost and TimeSchroff has expanded its system integration facilities to provide a comprehensive service aimed at customers who are looking to reduce overheads and product development times by outsourcing some or all of their design and manufacturing activities. 
Hand-Held Enclosures with Desk StationsOKW has introduced four new versions of it's popular 'DATEC-CONTROL' hand-held enclosures. Typical applications will include data-collection units, measuring and control equipment, medical and wellness devices etc. 
Ergonomic and tactile enclosuresOKW's 'ART-CASE' series has been joined by six new models. These attractive, ergonomically shaped, and tactile enclosures have been designed to house the latest electronic innovations. 
Pocket-Sized EnclosuresOKW's latest hand-held enclosures have been designed to house the latest pocket-sized electronics. Typical applications will include measurement and digital control devices – wireless or with cable connections, medical and laboratory equipment and peripherals and interfaces. 
Enclosure and door sealing made easy with KemtronExtruded gasket profiles in soft easy to compress silicone sponge suitable for enclosure and door sealing. The material is approved to UL94V0 for flame retardency making it suitable for indoor applications. 
RoHS compliant EMC ventilation panelsKemtron has introduced a RoHS compliant aluminium passivation process for its aluminium honeycomb EMC ventilation panels. The process has eliminated the hexavalent chromium which is present in some aluminium passivation processes. The new conversion coating meets the requirements of Mil-C-5541E for corrosion and electrical conductivity. |
Headlines
 |
