|
Search
Useful Links  |
Comms ICsAnalog Devices - High Performance, Radio Frequency Circuit for Short-range Wireless Systems in Industrial, Science and Medical ApplicationsAnalog Devices announced today the availability of an RF transceiver targeting short-range wireless systems in the global 2.4 GHz ISM (industrial, science and medical) band. The transceiver supports the IEEE802.15.4 standard and may be used to implement solutions based upon protocols such as Zigbee® IPv6/6LowWPAN, ISA100.11a and Wireless HART, as well as offering the flexibility to implement proprietary FSK-based protocols with data rates of up to 2 Mbps. ADI's new ADF7242 short range transceiver offers best-in-class blocking resistance to increase the effective signal quality and range as well as prolong battery life. Applications include smart meters/smart grid; wireless sensor networks, building automation, industrial wireless control, wireless remote controls, consumer electronics and healthcare. 
Atmel Features Industry's Lowest Power Wake-up Management with New LIN Transceiver FamiliesAtmel announced the availability of two new transceiver families for LIN automotive networking applications. Featuring the industry's lowest power wake-up management (the power consumption of competing solutions is up to 10 times higher), the new Atmel LIN families serve automotive body electronics applications such as door modules, seat control or intelligent sensors, and powertrain applications such as engine control systems. In addition, Atmel's ATA6663/64 transceivers are suited for other body electronic applications where low-speed data communication and low cost are important. 
Silicon Labs SI4830 AM/FM Receiver Brings Digital Performance to Analog RadiosSilicon Laboratories is bringing the benefits of digital performance and integration to mechanically tuned analog radios with the introduction of the Si4830 AM/FM receiver. Silicon Labs' new Si4830 AM/FM receiver IC reduces product design time and system cost and streamlines manufacturing for a wide range of radio products such as portable radios, boom boxes, clock and lamp radios, toy radios and give-away radios. 
Narrow band multi-channel transceiver LMD-400-R conforms to EN300113 and FCC Part 90Circuit Design, Inc. the leading supplier of narrowband radio modules has developed and released the data transceiver LMD-400-R, designed for use under the European Land Mobile Service specification EN 300-113 and Private Land Mobile Services FCC Part 90 in the U.S. market. The LMD-400-R is the same size and pin-compatible with Circuit Design's EN 300220 compliant license-exempt transceiver model STD-302N-R that has been widely used in Europe as a standard transceiver for remote control in industrial radio applications. 
NVE Introduces Isolated CAN TransceiverNVE Corporation today announced the introduction of the IsoLoop IL41050T isolated Controller Area Network (CAN) transceiver. Transceiver and isolation functions are integrated in a single device with improved performance and reduced chip count compared to discrete transceivers and traditional optocouplers. The IL41050T fully complies with the ISO 11898 CAN standard and de facto industry standards, and provides an isolated interface to three volt or five volt microcontrollers. 
RF Micro Devices Introduces Single-Placement RF Front EndsRF Micro Devices introduced the RF7178 – said to be the cellular industry's first front end module to integrate a quad-band, class 12-compliant GSM/GPRS power amplifier, a pHEMT antenna switch and receive SAW filters. 
CMX994 - Direct Conversion I/Q Demodulator - DCRx has the EdgeCML Microcircuits a leading innovator and provider of low-power semiconductors for global wireless and two-way radio communications markets, has added a new Direct Conversion Receiver IC (DCRx) to its family of RF Integrated Circuits. 
picoChip delivers complete range of next generation femtocell solutionspicoChip unveiled three new products that allow its customers to address the complete range of femtocell requirements via a single design platform. The introduction of two new picoXcell system-on-chip (SoC) devices and an integrated suite of HSPA+ femtocell access point (FAP) software creates the industry's most complete family of system-level femtocell solutions. 
Lime Microsystems announces availability of multi-band multi-standard transceiver with fully integrated ADC and DAC for femtocell applicationsLime Microsystems has announced the availability of the LMS6002D, a multi-band multi-standard RF transceiver IC designed for small cell base stations and femtocells, featuring integrated high performance dual ADC and DAC. This single chip transceiver solution delivers increased levels of integration over the company's analogue version, the LMS6002. The highly frequency agile transceiver operates at user-selectable frequencies between 375MHz and 4GHz and is suitable for 3G, WiMAX, and LTE operation. 
Avago Technologies - Ultra Low Noise Amplifier for Cellular Infrastructure ApplicationsAvago Technologies announced the latest edition to its family of ultra low noise, high gain, high linearity Gallium Arsenide (GaAs) active bias amplifiers for use in cellular infrastructure applications. Avago's MGA-633P8, which is an easy-to-use GaAs monolithic microwave IC (MMIC) low noise amplifier (LNA), provides 'Best in Class' performance and has a compact footprint. Additionally, it has a common printed circuit board layout, which is ideal for front-end applications used in cellular base stations. 
MAX14770E: +5V, fail-safe, PROFIBUS-DP/RS-485 transceiver for rugged industrial environmentsMaxim introduced the MAX14770E PROFIBUS-DP/RS-485 transceiver. Maxim's next-generation BiCMOS process technology enables the device to achieve fast (20Mbps) data throughput while integrating robust (±35kV, HBM) ESD-protected structures in a small TQFN package. 
Phyworks transceiver extends reach and reduces gauge of copper cablesThe PHY2210 equalizing cable transceiver from Phyworks enables cable manufacturers to extend the reach and reduce the gauge of active copper cable assemblies supporting all standard data rates up to 10.5Gbps. Integrating a high performance equalizer, limiting output amplifier and easily adjusted pre-emphasis cable driver, the PHY2210 will handle 10G datarates running over 15m of lightweight 24AWG twin ax cable. Worlds First 100 Gigabit Network Processor now available from Broadband TechnologyEZchip Semiconductor, a leader in Ethernet network processors, today announced that it is sampling its NP-4 100-Gigabit network processor (NPU). With NP-4, EZchip brings to market the highest performance programmable single-chip solution for Carrier Ethernet equipment. 
Energy Micro to enter low power RF arenaEnergy Micro has announced it is to begin development of a companion range of low power RF transceiver products. In line with its successful microcontroller design philosophy, Energy Micro is aiming to produce RF devices consuming a quarter of the energy of existing leading edge products. 
MAX13171E/73E/75E: Next-generation multiprotocol chipset maximizes data throughput and provides enhanced ESD protectionMaxim introduced the MAX13171E multiprotocol data transceiver, the MAX13173E multiprotocol clock transceiver, and the MAX13175E multiprotocol termination IC. These three devices form a multiprotocol transceiver chipset that supports V.28 (RS-232), V.10/V.11 (RS-449/V.36, EIA-530, EIA-530A, X.21), and V.35 protocols. Designed using Maxim's next-generation BiCMOS process technology, this chipset is a pin-compatible upgrade for the MXL1543B/MXL1544/MXL1344 chipset. 
MAX9947: Single-chip AISG-compliant transceiver is 100x smaller than discrete designsMaxim introduced the MAX9947, a fully integrated AISG-compliant transceiver. This single-chip solution packs a transmitter, receiver, and active filters into a 3mm x 3mm TQFN package that is 100x smaller than discrete solutions. Additionally, the transceiver provides an autodirection output to facilitate RS-485 bus arbitration in tower-mounted equipment without requiring a microcontroller. The high integration of the MAX9947 greatly simplifies the implementation of AISG-compliant base stations and tower-mounted equipment. 
High Dynamic Range Active Upconverting Mixer Supports All LTE/Cellular Bands from 400MHz to 2.7GHzA new wide bandwidth active upconverting mixer, the LT5578 from Linear Technology, delivers high dynamic range performance from 400MHz to 2.7GHz, supporting all of the allocated LTE (Long-Term Evolution) broadband wireless services. At 900MHz, the mixer offers 27dBm Output IP3 linearity and best-in-class noise floor of -160.5dBm/Hz at an output level of -5dBm, enabling outstanding transmitter dynamic range. 
MAX3107- Tiny Serial UART integrates an oscillator and saves space, power, and cost for industrial and mobile applicationsMaxim claims the industry's lowest power, fastest, and smallest serial UART to communicate over an SPI/I2C interface. The MAX3107 has low power consumption which will extend battery life in portable applications. The device's fast data rates (24Mbps) and deep FIFO (128 words) allow additional buffering and thus relieve demand on the system's microcontroller. The MAX3107 is packaged in a space-saving, 24 pin (3.5mm x 3.5mm) TQFN, which is 24% smaller than other serial UARTs in the market today. 
austriamicrosystems announces high voltage automotive CMOS LIN 2.1 transceiver ICs with add ons enabling powerful LIN slavesaustriamicrosystems today announced two new in-vehicle-network ICs, the AS8520 and AS8530. The AS8520 is dedicated to LIN slaves which can be found in car doors, car roof modules, seat modules or similar applications providing the transceiver, a voltage regulator, four-wire micro controller interface for window watchdog, diagnosis and backup register access, as well as two relay drivers and a resistive attenuator. The AS8530 is a general purpose companion IC for LIN slaves providing the transceiver, a LDO and a shared pin microcontroller interface with window watchdog inside an 8-pin package. 
Tiny LNAs improve GPS receive sensitivity over discrete or integrated receive solutionsMaxim has introduced the MAX2657 and MAX2658, which are two tiny, battery-sipping LNAs (low-noise amplifiers) designed for GPS-enabled applications operating in the 1575MHz band. Maxim merges its innovative SiGe BiCMOS process technology and WLP (wafer-level packaging) expertise in these devices, and they improve the performance of GPS receive sensitivity with an ultra-low 0.8dB noise figure. This sensitivity is an improvement over both discrete GaAs and Phempt LNAs or highly integrated RF CMOS solutions. 
Avago Technologies - DC-80 GHz Travelling Wave Amplifier for Microwave Radio Systems and Satellite VSAT ApplicationsAvago Technologies has introduced an ultra broadband travelling wave amplifier (TWA) for high-speed digital communications applications that operate in the 30KHz to 80GHz frequency band. Avago's AMMC-5025 amplifier provides 8 dB of small signal gain and excellent gain flatness of ±0.7 dB along with better than 10 dB input and output return loss to provide superior performance which is ideal for use in Test and Measurement equipment, Radar Warning Receivers, Wideband Communications and Surveillance systems, and Point-to-Point Radios. 
Microtune - Receiver Chip Delivers Superior Performance, Cost and Size to Worldwide Digital TV MarketMicrotune has introduced a radio frequency (RF)-to-baseband IC, based on a new, highly integrated silicon architecture, that delivers uncompromised TV receiver performance at a compelling new price point. The MT3141 single chip enables TV manufacturers to use a smaller, higher-performance and more cost-effective receiver across their next-generation global digital television designs. Using Microtune's MT3141, manufacturers can build thinner, lighter digital TVs that deliver premium performance for all brands, models, price points and screen sizes. 
austriamicrosystems - High performance single-channel 125 kHz LF wakeup receiver requiring minimal external componentsaustriamicrosystems has expanded its RF product portfolio with the AS3930, a single-channel low power, low frequency wakeup receiver which offers the highest sensitivity at lowest current consumption for the industry's best range. The AS3930 supports the widely used 125 kHz band and, through the optimization of power consumption, sensitivity and programmability, enables a variety of applications. RFMD Introduces RFFC0085 Frequency Converter ICRF Micro Devices has announced the introduction of the RFFC0085 frequency converter IC. The CMOS-based RFFC0085 frequency converter IC is designed for use as an Out-of-Band (OOB) receive circuit tuner in cable industry and SATCOM-DBS set-top boxes, DOCSIS® Set-Top Gateways, OpenCable Application Platform (OCAP™) CableCards, Tru2Way™ products and CableCard-equipped HDTVs. 
SIMCom single-chip module supports multi-channel wireless communicationACAL Technology announces a new single-chip module which combines short-range RF with an embedded SIM for GSM or GPRS communication. Designed for low-cost machine-to-machine (M2M) applications, such as smart metering, wireless sensing, telemetry or access control and security, SIMCom's SIM 802 module can connect to an unlimited number of slave nodes and features programmable transmit power to maximise battery life. 
Maxim Integrated Products announces 2000MHz to 3000MHz SiGe passive mixerMaxim has introduced the MAX2042, the industry's highest performance, fully integrated, 2000MHz to 3000MHz SiGe passive mixer. Designed specifically for LTE, WiMAX, WCS, and MMDS wireless-infrastructure applications, the MAX2042 delivers an unparalleled combination of linearity, noise performance, and component integration. When configured as a downconverter, this IC provides 36dBm of IIP3, 23.4dBm of IP1dB, 7.2dB of conversion loss, and a 7.3dB noise figure. In addition, it exhibits excellent 2nd- and 3rd-order spurious suppression. As an upconverter, the MAX2042 delivers equally impressive performance with 32.4dBm of IIP3, 67dBc of LO ±2IF suppression, and a conversion loss of only 6.8dB. Together, these parameters make the MAX2042 ideal for demanding base-station applications where high linearity and a low noise figure are critical for enhanced receiver and transmitter performance. 
Single-chip 14G VCSEL driver and dual-path limiting amplifierMaxim has introduced the MAX3799, a single-chip VCSEL driver and dual-path limiting-amplifier solution targeted at SFP+ Ethernet and Fibre Channel applications. Fabricated using Maxim's MBiC3 IC technology, this device delivers up to 14Gbps performance, a wide range of programmable receiver and transmitter features, and only 320mW of power consumption. Packing the functions of two chips into one, the MAX3799 provides a low-cost, low-power solution optimized for Ethernet 1000BASE-SR/10GBASE-SR and 2x/4x/8x/16x Fibre Channel transmission systems, thus simplifying transceiver BOM for module manufacturers. Avago Technologies - First GPS Front-End Modules that Integrates an FBAR Pre-Filter with a Low Noise AmplifierAvago Technologies has introduced the industry's first highly integrated miniature GPS front-end modules that combine a film bulk acoustic resonator (FBAR) filter with a high-gain, low noise amplifier (LNA) that offers superior performance levels. Avago's ALM-1912 integrates a LNA and a high-rejection pre-filter in a miniature compact package to provide a complete and compact high-performance GPS radio frequency (RF) front-end module that can help to simplify the design of a wide range of GPS handset applications. 
Elan Digital releases USB-to-SDIO Host Bridge ChipElan Digital Systems, specialist innovators in SDIO design, announce the release of its latest connectivity device, the VUB300. This device provides a single SD/SDIO port via USB 2.0 system interface. 
austriamicrosystems presents the worldwide first FlexRay transceiver produced in series, certified to the FlexRay specification V2.1 Rev Baustriamicrosystems has introduced the AS8221 FlexRay Standard Transceiver, which is certified to the latest FlexRay Standard V2.1 Rev B. This semiconductor device acts as the interface between digital logic and copper cable transmission, for the next generation of automotive networks. 
Low-voltage, low-capacitance switches deliver high-speed bidirectional bus switchingToshiba has launched a family of low-voltage, low-capacitance switches that provide bus switching for applications requiring high-speed bidirectional data transfer. Devices in the new TC7MBL/WBL/SBLxxxxC family will suit a variety of designs requiring high-speed bus switching and isolation including mobile phones, digital cameras, consumer electronics equipment and flat panel displays. Avago Technologies Continues Expansion of Next-Generation SFP+ Transceiver Products for 10 Gbps Ethernet AppsAvago Technologies has announced yet another expansion of its family of SFP+ optical transceiver modules for next-generation 10 Gbps Ethernet equipment designs. The new additions to Avago's SPF+ transceiver series include the 10/1 Gbps dual-rate AFCT-701SDDZ 10GBASE-Long Range (LR) single mode and AFBR-703SDDZ 10GBASE-Short Range (SR) multimode fiber transceivers for use in enterprise and data center applications. The dual-rate operation allows flexibility in data rate control through hardware or software control. 
Intelligent Network Controller with Built-in TCP/IP Developed for Home NetworkingIn response to the emerging network enabled home appliance market as well as the support the increasing number of internet connected industrial products, EPSON Electronics has developed the S1S60000 single-chip network controller. Available from 2001 Electronic Components, the S1S60000 incorporates all of the protocol stack functions and other elements needed to connect household and industrial appliances to a network As protocols required for TCP/IP connectivitiy are processed internally, only simple commands and data need to be sent from the host microcontroller in order to enable TCP/IP communication. 
High Linearity Downconverting Mixers Improve Performance & Reduce Power Consumption in 3G & 4G Wireless BasestationsLinear Technology has announced the LTC554x family of four new high dynamic range downconverting mixers covering the 700MHz to 4GHz wireless infrastructure frequency range. The LTC554x mixers offer outstanding IIP3 (input third-order intercept) of 26dBm, low noise figures of 9-10dB and high conversion gain of 8dB, enabling excellent dynamic range performance for both main receivers and digital predistortion receivers. 
Phyworks quad equalizer extends XAUI lanes by 50%Phyworks has announced a high performance quad backplane equalizer chip for line cards using IEEE802.3ae XAUI backplane interfaces. The PHY3980 can drive four 3.125Gbps FR-4 PCB data lanes at distances of up to 60 inches (1.5m), an increase of up to 50% over existing pin-compatible solutions. Microtune - Ultra-Small, Super-Integrated MicroCeiver IC PlatformMicrotune has announced details of a new ultra-small, low-cost technology platform, named MicroCeiver, the foundation for the Company's new highly integrated receiver products for the digital TV and cable TV markets. 
Complete Communication Solution For Portable and Maritime Mobile TransceiversThe new CMX885 Marine VHF baseband processor is designed to meet the global requirements of low cost, highly integrated marine VHF transceivers by offering complete audio processing with selectable audio processing order. Atmel - Next-generation, feature-rich Active AM/FM Antenna ICsAtmel has announced the availability of a new active antenna integrated circuit (IC) designed for AM/FM car antenna applications. The new ATR4252 IC provides the industry's highest integration, automatic gain control, supply voltage regulator with overvoltage protection and an antenna sensor. Designers can now develop smaller, high-performance active antenna solutions for applications located in the mirror, bumper, rear or side windows of a car. In addition, the antenna detection functionality is ideal for modern window or glass antennas. The robust IC also addresses other antenna types including window, pole or shark fin antennas with its small 4 x 5 mm footprint. 
Peregrine Semiconductor Delivers Best-in-Class 2-bit Digital Step Attenuator for 4G LTE ApplicationsPeregrine Semiconductor Corporation, a leading supplier of high-performance RF CMOS and mixed-signal communications ICs, today announced the new PE43204 2-bit UltraCMOS Digital Step Attenuator (DSA). This newest addition to Peregrine's highly popular DSA portfolio offers best-in-class performance with exceptional attenuation accuracy and linearity, making it ideal for 4G Tx/Rx applications such as cellular base stations and remote radio heads where a DSA is required to adjust the power level. In diversity Rx applications the fast switching PE43204 protects the receive path and prevents overdriving the A/D converter. 
HDMI 1.4 Transceiver for Consumer Audio/Video DesignsAnalog Devices has expanded its Advantiv advanced television portfolio with the introduction of the first HDMI 1.4 (High-Definition Multimedia Interface) transceiver for home and pro (professional) AV (audio/video) designs. ADI's ADV7623 HDMI 1.4 transceiver incorporates Xpressview fast switching technology, which enables seamless, automatic switching between HDMI-enabled AV devices in a fraction of a second, eliminating up to 19 seconds of delay required by many AV systems. 
Phyworks 10G CMOS transceiver is first to integrate temperature sensor and diagnostic reportingPhyworks has introduced the first single chip transceiver in CMOS to offer an integrated ±3°C temperature sensor and diagnostic reporting. Designed for 10GBASE-SR and 1G to 8G Fibre Channel SFP+ optical applications, the PHY3070 can be used with an external junction-temperature monitoring transistor to improve module temperature sensing accuracy. This reduces measurement variance due to the influence of IC temperature. 
Analog Devices Delivers Breakthrough Radio Frequency Circuits for 4G Cellular Base StationsAnalog Devices has introduced a series of highly integrated RFICs (radio frequency integrated circuits) designed for LTE and 4th generation (4G) cellular base stations. LTE is a set of enhancements to the UMTS (universal mobile telecommunications system) standard and is considered to be the last step toward the 4th generation of radio technologies in cellular networks. 
HDMI Chip from STMicroelectronics Cuts Time-to-Market for High-Definition TV ProductsSTMicroelectronics has introduced a chip that simplifies the design of HDMI-compliant connections for high-definition products such as set-top boxes, Blu-ray players, game consoles and HDTVs. The new IC, the HDMI2C1-5DIJ, assures designers of meeting HDMI specification version 1.3, while occupying up to 70 percent less board space than an equivalent network of discrete components for ESD protection, boosting, and level shifting of HDMI control signals. Black Sand Technologies - First 3G CMOS RF Power AmplifierBlack Sand Technologies, Inc., a fabless semiconductor company specializing in advanced power amplifier technology for wireless applications, today announced that it has produced what it says is the world's first 3G CMOS RF Power Amplifier (PA). Black Sand's proprietary CMOS PA architecture offers a breakthrough in combined performance, cost, battery life, and reliability for mobile devices such as mobile phones and datacards. The company also announced today that it has received US$10 million in its second round of funding. 
Avago - GPS Low Noise Amplifiers with Integrated Pre- and Post-High Rejection FBAR FiltersAvago Technologies today introduced a new miniature compact highly integrated GPS low noise amplifier (LNA) that offers superior performance levels. Avago's ALM-1812 integrates a LNA and pre- and post high-rejection filters in a miniature compact package to provide a complete, compact and high-performance GPS RF front-end module that will help simplify the design of a wide range of GPS handset applications. Avago is a leading supplier of analog interface components for communications, industrial and consumer applications. 
Frequency Synthesizers with Sub-Picosecond Jitter Ease Timing Design for High-Speed SystemsMaxim has introduced the MAX3671/MAX3673 low-jitter, frequency synthesizers with nine phase-aligned LVPECL outputs for high-speed systems. These devices utilize a low-noise VCO and PLL architecture to generate high-frequency (312.5MHz), low-jitter (0.3psRMS) clock signals from a 62.5MHz reference-clock input. Configured through three 4-level control inputs, the MAX3671 simultaneously generates two different frequencies for both Ethernet port clocking and MAC clocking, while the MAX3673 generates outputs for CPRI/UMTS reference clocking (122.88MHz, 245.76MHz). 
u-blox launches ultra-low power GPS technology platformu-blox has announced the upgrade of its core CMOS technology to u-blox 6. Products based on u-blox 6 will have dramatically reduced power requirements thanks to new intelligent power management features. The innovations enable significantly extended battery life for power-critical GPS applications. NXP Ships One millionth FlexRay Transceiver for Automotive NetworkingNXP Semiconductors today announced that it has shipped its one millionth FlexRay transceiver to the automotive industry. This landmark shipment reiterates its number one position as the leading supplier of in-vehicle networking technology, making NXP the only provider to ship over a million FlexRay Physical Layer compliant transceivers. It also reflects a rapid increase in the adoption of FlexRay in-vehicle networking technology among car OEMs globally. Maxim - RS-232 Transceiver Integrates ±70V Fault ProtectionMaxim has introduced the MAX13223E, a ±70V fault-protected, dual-channel RS-232 transceiver. Pin compatible with the industry-standard MAX3223E, the MAX13223E is the first overvoltage-protected RS-232 transceiver on the market. It integrates ±70V fault protection on the RS-232 interface pins, thus eliminating the need for external fault-protection circuitry, such as polyswitch limiters and zener diodes. 
Quad Linear Equalizer Resolves Challenging Signal Integrity Problems Up to 10.3Gbps in Copper InterconnectsMaxim has introduced the MAX3986, a 1Gbps to 10.3Gbps, quad linear equalizer for copper interconnects. A high-performance, stand-alone equalizer, this device offers best-in-class port matching (typical return loss is 24dB) and channel-to-channel isolation (33dB, typ). Each channel is capable of compensating for losses in 20 inches of FR4, with data rates up to 10.3Gbps. 
STMicroelectronics Introduces Silicon Tuner Supporting Digital-Terrestrial TV Standard as Analog Switch-Off Gathers PaceAs demand grows for economical equipment allowing households to access digital terrestrial television services, STMicroelectronics has introduced a single-chip DVB-T silicon tuner that enables manufacturers to simplify product assembly and supply-chain management. 
Wideband RF Quadrature Modulator Targets Wireless InfrastructureCML Microcircuits is targeting its new wideband RF I/Q modulator IC at the designers of, broadband wireless access systems (WiMAX), microwave link transmitters (including ODFM/COFDM), cellular picocell/nanocell systems, satellite communications and any other wideband wireless infrastructure systems requiring high performance I/Q modulation. Fujitsu - USB 3.0 to SATA Bridge ICFujitsu Microelectronics has announced the MB86C30A, one of the first available USB 3.0 to SATA bridge ICs, which supports the ultra-fast 5Gbps maximum data transfer rate of SuperSpeed USB, the USB 3.0 specification. The MB86C30A is the first in Fujitsu's new MB86C30 Series of USB 3.0 to SATA bridge ICs. When embedded in PC peripheral devices the IC provides an order of magnitude increase in data transfer rates from external storage devices, such as hard disk drives (HDDs), to PCs, in comparison to the USB 2.0 specification. 
PMC-Sierra Multi-service convergence platform enables end-to-end OTN deployment in Carrier networksPMC-Sierra has launched the PM5420 HyPHY 20G and PM5426 HyPHY 10G devices to enable the convergence of high-bandwidth data, video and voice services over Optical Transport Network (ITU-T G.709 OTN) based Metro infrastructures. OTN is the industry's choice as the replacement technology for SONET/SDH, providing optimised transport of IP services. The global transition, however, has been delayed by the need for low-power, cost-effective service gateways with simultaneous protocol support for Carrier Ethernet, video, storage area network (SAN), OTN and SONET/SDH at the network edge. 
Avago Technologies - Balanced Low Noise Amplifiers for Cellular Infrastructure ApplicationsAvago has announced two ultra-low noise, high gain, high linearity Gallium Arsenide (GaAs) balanced low noise amplifiers for cellular infrastructure applications. Avago's MGA-16516/17516, which are the latest additions to its family of economical, easy to use LNAs, helps to significantly improve the sensitivity and dynamic range of cellular infrastructure applications. Both LNAs feature a compact footprint and are designed to be used as first stage LNAs. Typical applications include cellular base station transceiver radio cards, tower mounted amplifiers, combiners, repeaters and remote/digital radio heads. 
National Semiconductor Claims Industry’s Lowest-Noise Frequency SynthesizerNational Semiconductor has announced a low-noise, fully integrated frequency synthesizer. The PowerWise LMX2541 provides less than 2 milli-radians (mrad) root-mean-square noise at 2.1 GHz and 3.5 mrad RMS noise at 3.5 GHz, outperforming the nearest competitor by 10 dB in both in-band phase-locked loop (PLL) noise and spurious performance. 
Avago Technologies - Miniature FBAR Band 2 High Isolation Duplexers for UMTS Handsets and Data TerminalsAvago Technologies today announced a new miniature PCS duplexer that has been specifically designed for use in UMTS Band 2 handsets. The ACMD-7407 duplexer, which is the latest addition to Avago's family of PCS duplexers, is 33 percent smaller than its previous versions. Designed using Avago's own FBAR technology, this UMTS duplexer has a common footprint and targets designers of PCS handsets, and data terminals operating on the U.S. PCS frequency band. Avago is a leading supplier of analog interface components for communications, industrial and consumer applications. 
Low-Jitter Transceivers from National Semiconductor are said to Deliver 30 Percent More Backplane and Cable ReachNational Semiconductor has introduced two energy-efficient, quad transceivers that are said to extend backplane and cable reach up to 30 percent farther than competitive devices. These PowerWise signal conditioning devices drive high-speed signals in data center servers and storage area networks (SANs). The DS50PCI401 is PCI-SIG-approved to the PCI Express (PCIe) Gen1 (2.5 Gbps) and Gen2 (5 Gbps) specifications, while the DS64BR401 supports both 3 Gbps and 6 Gbps SATA/SAS specifications, along with other high-speed signaling standards such as XAUI, serial Rapid IO (sRIO) and Fibre Channel. 
Very-Low-IF ASK/OOK Receiver Minimizes System Cost by Eliminating an External IF FilterMaxim has introduced the MAX7036 very-low-IF, superheterodyne receiver for ASK/OOK data in the 300MHz to 450MHz frequency range. Only requiring a few external components to implement a complete receiver-chain solution, this device integrates an LNA; self-contained PLL block; 400kHz IF filter with RSSI; and analog baseband, data-recovery circuitry. To ensure excellent, consistent receiver sensitivity of -109dBm, these critical blocks have been designed to operate over the -40 degrees Celsius to +105 degrees Celsius temperature range. The MAX7036 is ideal for applications such as remote keyless-entry systems, car alarms, home security systems, remote controls, and garage door openers. 
Silicon Labs - Single Channel Telephony ICSilicon Laboratories claims the industry's highest performance, highest integration and lowest power family of single-channel foreign exchange station (FXS) solutions. The Si3217x ProSLIC family is the first to integrate everything needed for an FXS interface into a single package, reducing board area by 50 percent without compromising the performance and diagnostic capabilities typical of traditional telephony service. 
Downconverting SiGe Mixer for WCS, LTE, WiMAX, and MMDS Base StationsMaxim has introduced the MAX19996A, a fully integrated, 2000MHz to 3900MHz downconverting mixer with an on-chip LO buffer. Designed using Maxim's proprietary, monolithic SiGe BiCMOS process, this device delivers an unparalleled combination of linearity, noise performance, and component integration over an exceptionally wide band of operation. 
Digital Step Attenuators Feature Serial AddressabilityPeregrine Semiconductor has released the latest in the new UltraCMOS Digital Step Attenuator 50Ω series. Building on their high-performance predecessors, along with direct and latched parallel interface logic these new HaRP-enhanced devices also offer highly flexible serial programmability with attenuation options covering a 7.75 dB (PE43501)and 15.75 dB (PE43601) attenuation range in 0.25 dB steps. 
SMSC Launches Ethernet ControllerSMSC today launched the LAN89218, its first TrueAuto high-performance single-chip 10/100 Ethernet controller. This device is designed specifically to meet the high reliability standards required by automotive applications such as on-board diagnostics or fast software download interfaces for central gateway and telematics modules, navigation systems, radio head units and connectivity devices. 
Compact Multimode Silicon Tuner Receives T-DMB, ISDB-T, and DAB BroadcastsMaxim has introducesd the MAX2169, a multimode silicon tuner for mobile TV. This device receives signals in the FM, VHF-III, UHF, and L-band spectrums, making it ideal for multimode applications that need to receive mobile TV and audio broadcasts. Avago Expands Series of Miniature PCS FBAR Band Duplexers with Environmentally ‘Green’ VersionAvago has announced the addition of an environmentally 'green' PCS FBAR Band Duplexer to its series of miniature duplexers. The ACMD-7409 duplexer, which was designed using Avago's own FBAR technology, targets designers of PCS handsets, and data terminals operating in the U.S. PCS frequency band. 
Exar’s wireless UART chipset eliminates cables for serial or parallel interfacesExar's wireless UART chipset is now available from Nu Horizons. The chipset comprises a low-power single-chip transceiver, the XR18W753, and a wireless UART controller, the XR18W750, connected via an I2C bus master interface. By replacing cabled connections in industrial environments, the Exar solution increases equipment mobility, simplifies installations, and accelerates time to market. 
Low-leakage quad RS-422 transmitters deliver maximum ESD protection in small packagesIntersil has developed a series of small-footprint, quad 16.5kV ESD-protected RS-422 transmitters. These innovative devices feature wide supply-voltage operating ranges for motor control applications, process control networks, telecommunications products and factory automation systems. 
850MHz to 1550MHz SiGe Mixer Delivers Unparalleled Spurious Intermodulation RejectionMaxim has introduced the MAX2051, a high performance, fully integrated, 815MHz to 1550MHz SiGe passive mixer. Designed specifically for multicarrier cable head-end downstream video, cable modem termination systems (CMTS), video-on-demand and DOCSIS(R)-compliant edge QAM modulation, and wireless-infrastructure applications, the MAX2051 delivers an unparalleled combination of linearity and spurious suppression over an exceptionally wide IF bandwidth of 50MHz to 1000MHz. 
Toshiba expands family of low noise SiGe MMIC amplifiers featuring integrated pass-through capabilityToshiba Electronics Europe has announced a new family of miniature, low noise amplifiers that provide good linearity and low current consumption in VHF-UHF wide band applications where input signal strengths may be variable. The new SiGe cellpack devices are particularly suitable for stationary and mobile terrestrial tuner applications where they can be used to improve dynamic range and minimise distortion while reducing power consumption and component density. 
Re-Drivers Support PCIe Gen II and SATA/eSATA Gen III Data RatesMaxim Integrated Products has introduced two new re-drivers to support the industry's latest high-speed serial interfaces. The MAX4950 is a quad-channel buffer designed to re-drive PCI Express (PCIe) Gen I and Gen II signals (up to 5.0Gbps). The MAX4951 is a dual-channel (Tx and Rx) re-driver for SATA/eSATA Gen I (1.5Gbps), Gen II (3.0Gbps), and Gen III (6.0Gbps) signals. These protocol-specific re-drivers are intended for use in storage and computing applications that carry signals over long traces, through passive backplanes and connectors, and then over long cables to either an internal or an external storage device. 
picoChip claims industry’s first HSPA+ femtocell SoC to support true eight-user operationpicoChip has launched the picoXcell PC312 HSPA+ femtocell system-on-chip (SoC), the industry's first such device to support eight users, with simultaneous voice and data services. Offering 64QAM modulation and 3GPP Release 7 features for high-speed communication, the device is the newest addition to the picoXcell PC3xx family of single-chip femtocells launched in 2008. All are fully pin-compatible and offer customers a seamless migration path. RF Transceivers Advance Design And Deployment of Small 4G Base StationsAnalog Devices is adding to its broad RF portfolio with the announcement today of new integrated RF-to-digital baseband transceivers. The AD9356 and AD9357 integrated transceivers advance low-cost base-station designs and deployments for 4G technology, such as WiMAX and LTE (long term evolution). The deployment of WiMAX continues in both developed and developing nations to provide last-mile connectivity and wireless backhaul channels. As a result, the need for ubiquitous coverage and a high degree of spectral efficiency requires operators and base-station manufacturers to deploy greater numbers of smaller picocells and microcells to increase network capacity. NXP Expands High Speed CAN Transceivers PortfolioNXP Semiconductors has launched two new HS-CAN transceivers - the TJA1042 and TJA1051. Extending NXP's existing portfolio that includes the widely used TJA1040 and TJA1050, the new products offer a number of advantages over the current generation of HS-CAN transceivers. These include enhanced CAN functionality, improved performance, greater reliability, environmentally friendly packaging and reduced system costs. Both products have been approved by major European and North American car manufacturers and are available for sampling and volume production as of today. 
TI introduces first SuperSpeed USB-compliant transceiver test chipTexas Instruments, an active member of the SuperSpeed USB 3.0 promoters group, has introduced a new 5-Gbps transceiver test chip designed to the USB 3.0 specification version 1.0. The new transceiver is capable of driving and receiving signals over 4-m USB 3.0 cables to ensure data integrity. This transceiver will be demonstrated at the USB Developers Conference in Tokyo, Japan on May 21-22. 
Industrial radio transceiver module adapted for world wide useCircuit Design, Inc. has developed and released a full lineup of the RoHS compliant industrial use radio transceiver module STD-302N-R. Now 434MHz, 869MHz (EU), 458 MHz (UK), 419 MHz (China), 447MHz (Korea) and 429MHz (Japan) versions are available. 
Texas Instruments delivers complete low-power RF solution for ZigBee/IEEE 802.15.4, ZigBee RF4CE and smart energyTexas Instruments hsd introduced a complete 2.4-GHz radio frequency system-on-chip solution supporting the IEEE 802.15.4 standard and an extensive set of applications, including ZigBee PRO networks, ZigBee RF4CE remote controls, smart energy, home and building automation, environmental monitoring and wireless medical. Unlike competing solutions, the CC2530 provides up to 256K Flash to enable development of multiple network protocols, which TI supports with free, downloadable software and tools to ensure that customers have everything needed for complete system development. 
Broadband Active Filters and ADC Drivers Family from Linear TechnologyLinear Technology has introduced a family of five single and dual high performance, wide bandwidth lowpass active filter / ADC driver amplifier products providing cost-effective solutions in the smallest form-factor for challenging filtering applications in broadband wireless communications and signal processing equipment. 
HART Modem IC Minimizes System Size and Power ConsumptionMaxim has introduced the DS8500, a single-chip, HART-compliant modem IC that enables the smallest solution size for modulating and demodulating 1.1kHz/2.2kHz FSK signals. This device integrates an ADC and state machine to implement the digital filter required to eliminate noise from the HART signal. The built-in digital filter minimizes the number of external components while ensuring reliable signal detection in noisy industrial environments. Integrated Modulator Reduces Component Count With Industry-Leading RF Performance For Broadband Satellite ApplicationsAdding to its broad portfolio of RF ICs, Analog Devices has introduced a new highly integrated modulator for broadband satellite communications applications, such as VSAT (very small aperture terminals). ADI's new ADRF6750 modulator offers the highest level of integration and functionality by combining four devices into one small footprint. 
Avago Expands Family of Fully Matched Amplifiers with New High Gain, High Linearity Balanced Amplifier ModuleAvago Technologies has announced a new low-noise, high gain and high linearity balanced amplifier module for use in tower mounted amplifiers, low-noise amplifier (LNA) modules and cellular base station applications. Avago's ALM-1522, which is the latest addition to its ALM-1x22 family of economical, easy-to-use fully matched GaAs amplifiers, is ideal for major 800 MHz / 900 MHz cellular bands such as GSM, CDMA, UMTS and next generation Long Term Evolution (LTE) applications that operate in the 700 MHz band. 
10MHz to 6GHz Low Power RMS Detector with 40dB Dynamic Range from Linear TechLinear Technology has introduced the LT5581, a broadband 6GHz RMS detector, featuring 40dB dynamic range and a low operating supply current of 1.4mA. The device is well suited for a wide range of power monitor and control applications in portable and battery- powered wireless systems, cellular basestations, picocells and femtocells, fiber optic transmitters and instrumentation. The LT5581 outputs a DC voltage that is linearly proportional to the log input power, providing an easy-to-use, mV/dB scaling with exceptional linearity of better than ±1dB across 40dB range. Avago Expands Family of Next-Generation SFP+ Transceiver Products for 10Gbps Ethernet Equipment DesignsAvago Technologies has announced the expansion of its family of SFP+ optical transceiver modules for next-generation 10Gbps Ethernet equipment designs. The new additions include a 1310 nm LRM multimode fiber transceiver, and transceivers for both LR single mode fiber and SR multimode fiber applications with extended temperature capability for enterprise and data center applications. Avago is a leading supplier of analog interface components for communications, industrial and consumer applications. 
Ethernet-over-SONET/SDH Mappers Deliver New Ethernet ServicesMaxim has introduced the DS33M30/DS33M31/DS33M33 family of highly integrated Ethernet-over-SONET/SDH (EoS) mapping devices. These mappers merge new protocols for transporting Ethernet with the protocols of legacy optical networking, allowing service providers to deliver new Ethernet services using the existing optical transport infrastructure. 
Single-Chip VCSEL Driver and Limiting-Amplifier Solution for 8G Fibre Channel and 10G EthernetMaxim has introduced the MAX3798, a single-chip, VCSEL driver and limiting-amplifier solution targeted for SFP+ Fibre Channel and Ethernet applications. Fabricated using Maxim's MBIC3 integrated-circuit technology, this device delivers > 10Gbps performance, a wide range of receiver- and transmitter-programmable features, and only 320mW of power consumption. Packing the functions of two chips into one, the MAX3798 provides a low-cost, low-power solution for both Fibre Channel (1x/2x/4x/8x) and Ethernet 10GBASE-SR transmission systems, thus simplifying transceiver BOM for module manufacturers. 
Signal- and power-isolated surface-mount RS-485/422 transceivers from ADIAnalog Devices has expanded its interface product family with two integrated, galvanically-isolated RS-485/422 transceivers, each featuring an integrated isolated power converter. Providing unmatched levels of isolation performance, the ADM2587E and ADM2582E are the first transceivers to integrate a line driver, line receiver, oscillator, rectifier, regulator, and transformers into a single-chip that isolates both the data and power lines in a tiny 10 mm x 13 mm surface mount package. 
Fairchild's Optocoupler designed for Industrial Fieldbus CommunicationsFairchild Semiconductor's FOD8001 answers the need for system engineers' to design a robust industrial fieldbus network with low transmission error rates, low system failure rates and proven reliability over an extended period of time. Fairchild's high performance optocouplers offer best-in-class noise immunity resulting from its proprietary coplanar packaging technology, Optoplanar. 
SiGe Mixers for DCS/PCS, WCDMA, WCS, LTE, WiMAX, and MMDS Base StationsMaxim has introduced the MAX19995/MAX19995A/MAX19997A/MAX19999 family of high-performance, dual, downconverting mixers targeted specifically for DCS/PCS, cdma2000, WCDMA, WCS, LTE, WiMAX (TM), and MMDS wireless-infrastructure applications. Together with the previously announced MAX19985A, these mixers provide complete downconverter solutions that address all base-station applications spanning the 700MHz to 4000MHz bands. 
Highly Integrated UMTS Femto Base-Station Chipset From MaximMaxim has introduced the MAX2557/MAX2597, a WCDMA Band II and Band V femto base-station transceiver chipset with a unique digital interface for the North American UMTS market. The receiver (MAX2557) and transmitter (MAX2597) utilize Maxim's proprietary high dynamic range MAX-PHY(TM) interface to eliminate the need for a mixed-signal analog front-end. The MAX2557 has four low-noise amplifier (LNA) inputs to allow monitoring of WCDMA and GSM macro-network signals. 
Lime Microsystems claims first commercially available advanced wireless multi-band multi-standard RF transceiver ICLime Microsystems has announced the availability of LMS6002, a multi-band multi-standard RF transceiver IC designed for femtocells and small cell basestations. The high frequency agile transceiver operates at user-selectable frequencies between 375MHz and 4GHz and is suitable for 3G, WiMAX, and LTE standards. Lime will be demonstrating the LMS6002 transceiver, its first commercially available IC, to selected customers at Mobile World Congress 2009 in Barcelona, February 16-19. 
Fast Broadband Amplifiers from STMicroelectronicsSTMicroelectronics, a world leader in analog ICs, has introduced a new broadband signal amplifier IC that supports higher frequencies and faster response, as well as lower noise, than amplifiers used in current equipment. 
Low power equaliser driver and retimer simplifies from PhyworksThe PHY1066 equaliser, driver and retimer IC from Phyworks enables host board designers to create 10Gbps Ethernet SFP+ receive and transmit interfaces for 'direct attach' passive twin-ax copper cables and 10GBASE-SR optical modules. Its small size, low power and minimal external component count also make it suitable for use in active copper cable assemblies. 
RS-232 Transceivers from MaximMaxim has introduced the MAX13234E-MAX13237E family of RS-232 transceivers. Providing upgraded functionality to Maxim's legacy MAX3224E-MAX3227E RS-232 transceivers, these devices provide the industry's highest data rates (up to 3Mbps), low-voltage logic-level translation, low 1microamp supply current through the AutoShutdown Plus feature, and enhanced ESD protection. 
TI introduces high-temperature transceivers for oil exploration equipmentTwo new ceramic-packaged transceivers from Texas Instruments enable data communication in high-temperature applications. The devices feature no thermal shutdown, meeting the demanding requirements of oil exploration applications, such as downhole drilling. The SN65HVD11SJD 3.3-V single, half-duplex RS-485 transceiver and the SN65HVD233SJD 3.3-V CAN transceiver are the first two parts for an extended temperature range of -55C to 210C to be released from TI and are from a complete signal chain and power roadmap targeting applications operating in harsh environments. Future products will include data acquisition, processing and power managment devices. 25kHz Narrowband Transceiver from RadiometrixThe TR3M has been developed by the team of wireless communications experts at Radiometrix. It is high-end multi-channel narrowband transceiver that operates in the European 868MHz band (though custom variants for any 3MHz frequency block from 860-870MHz are available on request). It supports data rates of up to 5kbits/s, and has a usable range of over 500m. Employing a 1200baud dumb modem it allows transmission across 80 different channels. 
TI introduces common mode, 70-V, fault-protected RS-485 transceiver familyTexas Instruments has introduced a family of +/- 70V, fault protected RS-485 transceivers that achieve overvoltage protection with no external termination needed. These low-power devices serve as drop-in upgrades to existing RS-485 designs without costly board redesigns. The new half- and full-duplex transceivers simplify design in industrial automation, motor control and heating, ventilating, and air conditioning (HVAC) equipment. 
Analog Devices Unveils 3G Transceiver for Femtocell Base StationsAnalog Devices has introduced the ADF4602-1 transceiver for 3G femtocell base stations that support the UMTS (universal mobile telecommunications system) wireless interface standard for home and office wireless infrastructure equipment. The highly integrated direct conversion transceiver incorporates frequency synthesizers, filters and power management circuitry and can be coupled with ADI's AD9863 mixed-signal front-end and ADL532x and ADL554x driver amplifier families to create a complete UMTS radio. 
Peregrine Semiconductor Claims Breakthrough in Mobile Antenna TuningPeregrine Semiconductor has claimed a breakthrough in the solution to mobile antenna tuning. The Company's new DuNE Technology, a patent-pending design methodology made possible by Peregrine's UltraCMOS process and HaRP design innovation, has enabled a single-die tunable capacitor circuit – referred to as a Digitally Tunable Capacitor (DTC) – which meets the high-performance demands for antenna tuning in leading-edge cellular and mobile applications. These demands include superb power handling and linearity; low power consumption; and highly integrated in a small form factor. For more than 20 years, the RF researchers have attempted to address these challenges with a variety of micro-electromechanical systems and ferroelectric materials technologies, each having its own merit yet unable to integrate the features and functionality enabled by Peregrine's DuNE Technology. 
Peregrine's High-Power RF Switch LinePeregrine Semiconductor has announced its new line of high-power RF switches for the mobile radio market. Featuring a 50 Watt 1dB compression point, the PE42510A single-pole double-throw (SPDT) and PE42650A single-pole triple-throw (SP3T) UltraCMOS RFICs deliver unprecedented linearity with ultra low insertion loss at high power. TI enables RFID tag reliabilityTexas Instruments and 3M Library Systems today celebrated a 10-year relationship that has created of one of the major markets for radio frequency identification (RFID) technology. To date, millions of TI Tag-it HF-I chips help libraries track periodicals in 3M Library Systems worldwide. Developed with a memory that reliably retains its data for an estimated 60 years at 131 degrees Fahrenheit (55 degrees Celsius), TI supplies its durable, high-quality HF chips in inlay format to 3M Library Systems, which manufactures RFID labels to tag library assets as part of its full-line of RFID solutions. The 3M RFID System streamlines the checkout and return, sorting and inventory management of library materials to better serve customers. 
Wideband Upstream Amplifier Completes Microtune’s DOCSIS 3.0 RF Solution OfferingMicrotune has introduced the MT1570 wideband upstream amplifier, the latest addition to the Company's portfolio of radio frequency (RF) silicon products supporting the cable industry's new DOCSIS 3.0 specification. A companion product to Microtune's DOCSIS wideband and narrowband tuners, the new MT1570 upstream amplifier enables an impressive 120-Mbps upstream pipeline, significantly increasing performance, data rate and reliability for bandwidth-intensive DOCSIS 3.0 services. 
TI’s single-chip MCU and low power RF solutionTexas Instruments has announced the new CC430 technology platform – demonstrated for the first time at electronica – offering the industry's lowest power, single-chip radio-frequency (RF) solution for microcontroller- (MCU) based applications. By reducing system complexity, shrinking package and printed circuit board (PCB) size by up to 50 percent and making RF design easy, the CC430 platform helps advance applications including RF networking, energy harvesting, industrial monitoring and tamper detection, personal wireless networks and automatic metering infrastructure (AMI). 
CML Unveils RF Quadrature ModulatorCML Microcircuits unveiled an I/Q modulator at the Electronica exhibition in Munich, Germany, adding to its family of RF integrated circuits. The new CMX993 is a highly integrated, general purpose, RF quadrature modulator, offering 100MHz to 1GHz operation and excellent wide-band noise performance. Additional features include gain control and uncommitted differential amplifiers. 
Staccato Unveils High-Performance, Single-Chip Wireless USB Host Solution for Worldwide OperationStaccato Communications today announced the latest addition to the Ripcord2TM family of single-chip UWB ICs, the new SC4503 PCI Express (PCIe) Wireless Host Controller Interface (WHCI) solution for Wireless USB host applications. Designed in a leading 65nm CMOS technology, the single-chip SC4503 implements a fully integrated WiMedia MAC and PHY and a high-performance PCIe interface. Targeted for home and office applications, including notebook PCs, ultra-mobile PCs, netbooks and mobile internet devices (MIDs), the Ripcord2 WHCI Host offering provides a worldwide-compatible solution in a single device and delivers the optimal performance required for host-side Wireless USB applications. Signal Processing Nirvana From SundanceSundance has announced the introduction of Radio Giga to the high-end communications market. Designed for applications such as 3G/4G Radio, Wireless infrastructure applications, Broadband cable modem head-end systems and Software Defined Radio (SDR), Radio Giga provides designers with a cross technology platform that is user configurable by processing fabric, architecture, comms ports and protocol. 
IDT announces PCIe system interconnect switchesIDT has announced the availability of a new series of PCI Express (PCIe) system interconnect switches that provide higher levels of performance, availability and optimal resource utilisation in demanding applications. The switches, built on a new IDT architecture, are the first in the industry to support multicast and multi-root partitioning. Moreover, IDT is further enabling the adoption of PCIe as the primary systems interconnect for computing and communications applications by extending and exceeding the requirements of the PCIe standard. 
Microchip's Automotive Certified LIN/SAE J2602 TransceiversMicrochip has announced the MCP2021 and MCP2022 (MCP202X) LIN/SAE J2602 transceivers. The new devices are 3rd party-LIN/J2602 approved, OEM approved, and AEC-Q100 certified to meet the stringent requirements of global automotive manufacturers worldwide. The transceivers include built-in voltage regulators and are compliant with the LIN Bus 2.0/2.1 and SAE J2602 standards, as well as the previous-generation LIN 1.X standards. 
National Semiconductor Introduces 3G-SDI Development KitsNational Semiconductor has introduced the industry's first triple-rate (3G/HD/SD) serial digital interface (SDI) and video clocking daughter card development kits that maximize system performance and simplify the design of new broadcast video equipment. The two daughter cards are compatible with development kits from Altera and Xilinx and include synthesizable field-programmable gate array (FPGA) source code and the entire SDI signal path and video clocking solution together on one board. This allows designers to evaluate system performance, implement or modify FPGA source code, finalize architectures and start new designs. 
National Semiconductor Introduces 3G-SDI Dual SerDesNational Semiconductor has introduced a triple-rate (3G/HD/SD) serial digital interface (SDI), dual-channel serializer and deserializer (SerDes) transceiver. With industry-leading jitter performance and two channels of receive and transmit on a single chip, National's LMH4345 SerDes transceiver enables engineers to reduce board space, system cost and power consumption in multi-channel broadcast video equipment. The device is well-suited for use in video routers, production switchers, video servers, format converters, video editing and modular equipment. 
TI introduces flexible, quad SerDes deviceTexas Instruments has introduced a four-channel serializer/deserializer (SerDes) IC that enables high-speed, bi-directional, point-to-point data transmission with up to 30 Gbps. The device has the flexibility to be configured either as a XAUI or 10 GFC transceiver. This multi-rate transceiver supports a wide data bandwidth range from 600 Mbps to 3.75 Gbps per serial lane to address design challenges in a variety of applications such as gigabit Ethernet links or backplane and front plane connections. 
SiGe Semiconductor Power Amplifier for Mobile WiMAXSiGe Semiconductor has expanded its series of power amplifiers and RF front end modules with the release of the SE7262L. A 2.5GHz high-power amplifier targeted for the mobile WiMAX market, it delivers industry-leading performance while exceeding the spectral mask requirements outlined in IEEE 802.16e and WiMAX Forum specifications. 
Isolator Family from NVE CorpNVE Corporation has announced the introduction of the IsoLoop IL500-Series of digital isolators, designed to be cost-effective optocoupler replacements. Compared to NVE's industry-standard IL700-Series isolators, which have speeds up to 150 megabits per second, IL500-Series isolators operate at two megabits per second, offer a DC-correct design, and have an external clocking option on certain models. 
Intersil’s video SERDES IC eliminates data control cables while increasing signal distanceIntersil has introduced the ISL34340, a SERDES Interface that transports 27 bits of video data and bi-directional I2C into a single high-speed LVDS cable of up to 10 meters long. The ISL34340 is ideal for SERDES applications in video systems, industrial and medical displays and video transport in printing and security systems. 
Peregrine Semiconductor Expands UltraCMOS™Digital Step Attenuator LinePeregrine Semiconductor Corporation today released three new 7-bit UltraCMOS™ Digital Step Attenuators to complement its popular 50-Ohm DSA line. Building on their high-performance predecessors, along with flexible Serial and Parallel interface logic these new HaRP™-enhanced devices also offer an unprecedented serial-addressable control interface which allows the user to control up to 8 different DSAs using a common 3-wire interface bus. The new trio offers highly flexible attenuation options by covering a 31.75 dB attenuation range in 0.25 dB, 0.5 dB, or 1.0 dB steps. 
Analog Devices Adds Direct Conversion Receiver Solution for Next Generation Cellular And Broadband Wireless To RF PortfolioAnalog Devices, Inc. continues to expand its radio frequency product portfolio, adding a new quadrature demodulator and dual gain trim amplifier for direct conversion receivers in next generation cellular 3G/4G and broadband wireless 802.16 applications. The ADL5380 demodulator is the industry's first product capable of operating from 400 MHz to 6 GHz, which allows radio designers to apply the same device across a range of products and frequency variants. The companion AD8366 is the industry's first dual-channel digital gain trim amplifier (DGTA) and is designed to enable, integrate and cost reduce direct conversion radio receivers. The combined two-chip solution can reduce the active component count by 60 percent within a radio design, providing considerable board area and bill of material (BOM) savings. 
RALCWI Family Grows With Duplex Vocoder ICCML Microcircuits announces a new RALCWI integrated circuit to its Vocoder family. The new CMX638, is a flexible, highly integrated, high performance duplex vocoder, utilising RALCWI (Robust Advanced Low Complexity Waveform Interpolation) technology. CML now offers the CMX608, CMX618 and CMX638 high performance vocoders, which all offer near toll-quality voice performance at very low bit-rates. 
RMS power detector measures signals with highly varying crest factors up to 6 GHzAnalog Devices has introduced the AD8363 TruPwr root-mean-square (RMS) power detector that precisely measures signals with highly varying crest factors up to 6 GHz used in WiMAX/802.16, WCDMA, TD-SCDMA, and LTE applications. The AD8363 supports the communications industry's focus on increasing efficiency and improving ease-of-use to reduce the overall system size and cost. The AD8363 targets high performance RF applications including power amplifier (PA) linearization/control loops, transmitter power control, transmitter signal strength indication (TSSI) and RF instrumentation. Accurate control of PA output power significantly reduces cost and improves efficiency. TruPwr ICs are ADI's award winning portfolio of patented RMS detectors. ADI offers one of the most extensive RMS portfolios in the market. 
RS-485/RS-422 transceiver claims best-in-class ESD protectionIntersil has introduced an RS-485/RS-422 transceiver, a next-generation interface IC that combines what is said to be the industry's fastest data transmission rate (100Mbps) with a low 2.6mA supply current and rugged 15kV IEC61000-4-2 ESD (electro-static discharge) protection. 
GaAs MMIC receivers from Link Microtek cover microwave radio bands from 7 to 28GHzNew from microwave and RF component specialist Link Microtek is a family of nine GaAs MMIC receiver products that integrate LNAs, I/Q mixers and multipliers or LO amplifiers to provide compact solutions with a very high level of performance. Manufactured by Hittite Microwave Corporation, the receivers cover the microwave radio bands from 7 to 28GHz and are suitable for a variety of commercial and military satcom applications. 
New RF Synthesizer with Integrated VCOs from STMicroelectronics Stretches Out to 5GHzSTMicroelectronics today unveiled its new RF synthesizer with integrated voltage-controlled oscillators (VCOs) with the highest frequency coverage in the market. ST's STW81103 is the first single-chip device that operates up to 5GHz, meeting the increasing demand of equipment manufacturers for space and cost-efficient solutions in radio applications with frequencies in the microwave range. Among the applications in which these devices may find application are wireless network infrastructures, CATV systems, instrumentation, and test equipment. 
40Mbps transceivers feature widest temperature rangeIntersil has introduced the ISL3159E and ISL3179E RS-485/RS-422 transceivers. These next-generation interface ICs combine 40Mbps transmission performance over the industry's widest temperature range (-40C to +125C) along with 15kV IEC61000 ESD protection and a DFN package option that is up to 70% smaller than standard 8-lead SOIC offerings. 
CML Launches Low Cost, Low Bit-Rate RALCWI Vocoder ICCML Microcircuits today announced the introduction of a new RALCWI (Robust Advanced Low Complexity Waveform Interpolation) vocoder IC. The product is the result of a co-operation between CML Microcircuits and SPIRIT DSP. The new CML IC is named as the CMX618, which CML will market to worldwide communication markets based upon SPIRIT's proprietary Low Bit-Rate Vocoder technology. The co-operation combines CML's 39-year history of developing mixed-signal semiconductors for professional and leisure communication applications, with SPIRIT's extensive experience in embedded voice products. 
Low-cost WLED drivers help handset manufactures address latest entry level marketsA huge potential market of untapped cell phone users in regions like India, China, Russia, South America and Africa want cell phone service, but can only afford very basic, entry-level, reduced-feature-set phones. With AnalogicTech's AAT3193, designers building cell phones for these new markets can provide basic illumination for low-cost TFT-LCD panels in an extremely small footprint while requiring just two external components; a 1µF capacitor for the charge pump and a single external resistor to set the full-scale LED current. 
Gigabit fibre access gateway solutionsPMC-Sierra has announced the availability of two fibre access gateway solutions - the MSP7150 EPON/GPON gateway SoC for Fibre To The Home (FTTH) and the MSP7140 VDSL2 gateway SoC for Fibre To The Node (FTTN). These SoCs deliver gigabit-per-second line-rate IPV4/V6 routing, Network Address Translation (NAT), Quality of Service (QoS), encryption and a multi-channel VoIP terminal adaptor, and consume less than 1.5W of power. PMC-Sierra's fibre access gateway solutions provide OEMs and ODMs with a common platform architecture to support multiple high-speed access technologies in various geographic markets. In addition, service providers can rely on equipment based on PMC-Sierra's multi-service platform to deliver carrier-grade IP services into the digital home. 
10 GbE LRM X2 Optical TransceiversAvago Technologies has announced a new family of 10 GbE LRM transceivers incorporating electronic dispersion compensation (EDC). The new product family includes X2, XENPAK and XFP. The company is a leading supplier of analog interface components for communications, industrial and consumer applications. Avago's new HFBR-707X2DEM X2 module reliably delivers 10G data rates in enterprise networking environments using multimode fibre. 
VDSL2 line driver in 4mm x 5mm QFN package is a first says IntersilIntersil has introduced the ISL1539, the latest addition to its family of line drivers featuring low power, very small footprint and extremely good linearity. The ISL1539 is the first monolithic, dual port, DSL line driver for 100 Mbps VDSL2 Central Office (CO) applications. The ISL1539 uses proprietary circuitry to achieve low distortion, high capacitance drive and less than 910mW/port total power consumption while delivering 20.5dBm output power in 5-band VDSL2 applications. The driver uses Intersil's own new high-speed bipolar process technology to extend the performance of ADSL2, ADSL2+ and VDSL2 bandwidth high voltage line drivers. 
True Femto-Second Performance Clock Generator for Networking DesignsTexas Instruments has introduced a low-phase noise clock generator that provides best-in-class jitter performance at 380 femtoseconds (fs) (rms at 10 kHz to 20 MHz). The device incorporates crystal oscillator (XO) circuitry with a fully-integrated frequency synthesizer supporting a wide output frequency range from 10.9 MHz up to 766.7 MHz and from 875.2 MHz up to 1175 MHz, easing design for customers designing Ethernet, fibre channel, PCI Express and Serial ATA products. 
Low-Power Gigabit Ethernet serializer/deserializerTexas Instruments has today introduced the industry's smallest low-power, single-channel Gigabit Ethernet (GbE) serializer/deserializer (SerDes) device, enabling higher densities in data communications and telecommunications equipment. The new interface device combines a small 6-mm x 6-mm package with low power consumption at 200 mW to reduce board size and complexity and save power in Ethernet passive optical networks (EPON), GbE switches/routers and wireless basestations. 
Two-chip IF receiver solution from Analog DevicesAnalog Devices has introduced a two-chip IF (intermediate frequency) receiver solution that dramatically improves the data bandwidth and capacity of next-generation, multi-carrier wireless base stations compatible with emerging 3G cellular transmission standards. Analog Devices' dual-channel AD8376 VGA (variable gain amplifier) and AD6655 IF diversity receiver solution replaces 48 discrete components, enabling 3G micro- and pico-cell base stations with dramatically reduced power consumption and physical volume. Each radio channel can handle up to six carriers. The new VGA and IF diversity receiver also increase automatic gain-control loop performance by 100 times existing options, which improves base station receiver sensitivity and dynamic range and ensures both weak and strong incoming cell phone call signals are quickly and effectively received and processed. 
Low power, asynchronous PCI-to-PCI bridgeTundra Semiconductor is now in full production of its low power, asynchronous PCI-to-PCI bridge. The Tundra Tsi350 offers communications and network equipment customers a competitive high quality bridge solution with low power consumption. 
Multipoint-LVDS Single-Channel Receivers from TITexas Instruments has introduced what is said to be the industry's first dedicated multipoint-LVDS receivers. To date, customers converting M-LVDS to LVTLL for multi-drop clock distribution have used transceivers with unnecessary integrated driver circuitry. The new single-channel receivers save space, power consumption and cost in end equipment such as cellular base stations, central office switches, network switches, routers and AdvancedTCA systems. The devices provide better technical performance in applications such as clock and synchronization distribution and control, as well as data signal transfer over backplanes and cables. 
Controller adds high-speed USB peripheral connectivity to storage hungry portablesOxford Semiconductor has introduced a high-speed USB peripheral controller designed to help maximize data transfer speeds of memory rich portable products including smart phones, media players, PDAs, and GPS systems. Compatible with USB specification revision 2.0, the OXU200 supports communication with PC and laptop host systems at the high-speed USB data rate. 
Zetex announces technology breakthrough in LNB designA 4:2 IF switch announced by Zetex Semiconductors is the world's first to feature integrated gain and control functions. Dramatically improving IF signal reliability, eliminating false switching and significantly reducing circuit complexity, the ZXHF5000 chip is set to have a far-reaching impact on the design of twin and quad LNBs and satellite TV distribution networks. 
Low Power Active Mixer with Bandwidth to 4GHz from LinearA new high performance mixer from Linear Technology features low power consumption and the capability of operating from low frequency up to 4GHz. The LT5560 can be configured either as an up- or a downconverting mixer, providing flexibility for a wide range of high performance portable or fixed wireless systems, including public-safety handheld radios, WiMAX transceiver modems, handheld RFID readers, VHF/UHF transceivers, wireless headphones and professional microphones, GSM/EDGE basestations and repeaters, satellite receivers, ISM band radios, and portable RF instrumentation. 
ADI's 2nd-generation chipset for advanced multimedia mobile handsets based on the 3G TD-SCDMA InterfaceAnalog Devices has announced the availability of its second-generation chipset for developers of advanced multimedia mobile handsets based on the 3G TD-SCDMA Low Chip Rate (LCR) air interface. The new SoftFone-LCR+ chipset expands Analog Devices' portfolio of TD-SCDMA technology solutions and builds upon the company's legacy as a leader in TD-SCDMA technology development by adding support for a wide range of enhanced multimedia functions. 
Digital Satellite Tuner RFIC from TDCThe CX24118 and CX24116 from Conexant, which form the front end (tuner and demodulator) for set top boxes supporting DVB-S2. The CX24118A Digital Satellite Tuner RFIC is Conexant's third generation direct down-conversion satellite tuner intended for high-volume digital video, audio and data receivers. 
Semtech Adds Jitter Attenuating and Multiplying PLL Devices for Cost-Sensitive Telecom SystemsSemtech Corp has announced the ACS8946 and ACS8944 jitter attenuating and multiplying (JAM) phase locked loop (PLL) devices for generating low jitter output clocks for low-cost SONET/SDH and Gigabit Ethernet line cards. 
High-Speed Interface ICs for mobile phonesTexas Instruments has introduced the expansion of its FlatLinkTM3G family of high-speed interface integrated circuits that transmit true 24-bit (16 million color) RGB color data for high-resolution video content in handheld electronics such as clamshell phones, multimedia players and digital cameras. The new one- and two-channel subLVDS (sub-low voltage differential signaling) serialisers and deserialisers support LCD resolutions from QVGA to XGA, including VGA, allowing designers to choose devices that specifically meet their resolution needs. 
Single chip Ethernet controllerAvailable from DT Electronics, SMSC's LAN9218 is a full-featured, single-chip 10/100 Ethernet controller that uses HP's Auto-MDIX technology. HP Auto-MDIX eliminates the confusion associated with device pin assignments, the need to add a manual MDIX switch or use cross-over cables. The LAN9128 is driver-, register- and footprint –compatible with the previous generation of LAN9118 devices. Designed for embedded applications where performance, flexibility, ease of integration and system cost reduction are required, the LAN9218 suits applications in high definition video and multimedia systems. 
DSL Solutions Based on TI's Next-Generation UR8 Residential Gateway ArchitectureTexas Instruments has announced the availability of five new xDSL solutions from its next-generation UR8 residential gateway family. Based on an advanced multimedia gateway processor, these platforms give manufacturers the flexibility to design RGs with multiple home networking options and variations of feature functionality, including enhanced voice capabilities and advanced video services, over all ADSL and VDSL2 standards. 
Jitter Attenuator with 250MHz Reference ClockIDT has announced the introduction of a jitter attenuator optimized for the Xilinx Virtex-4 family of FPGAs. Designed to support PCI Express (PCIe), this component is said to be the industry's first timing device capable of attenuating or "cleaning" the jitter from a 100 MHz PCIe input clock, while translating it to a 250 MHz LVDS output. 
1.8V high-speed DUARTSDT Electronics has made available Exar's family of dual universal asynchronous receiver transmitters (DUARTS) that operate from a 1.62V to 3.63V supply and feature 16, 32 or 64-byte FIFOs. Designated the M-series, each channel of these devices is capable of data rates up to 16 MBps at 3.3V with a 4X sampling clock. 
Chip enables next generation of DAB enabled digital audio productsFrontier Silicon has launched a new advanced and highly integrated system-on-chip IC which will enable the next generation of DAB digital radio-based products. The Chorus 2 FS1020 chip is a new programmable DAB baseband receiver providing significant space, cost and power savings on a typical radio or mobile handheld devices. The chip is now in mass production and products using the chip will appear in the market early 2007. 
Microwave Amplifier Range covers 0.5 to 18GHzNow available from RF and microwave component specialist Link Microtek is a range of microwave amplifiers that are competitively priced but are said to provide the quality and performance required for space, military and commercial communications applications. 
Optimized RF Front-End System Solution Reduces Size, Cost of Wi-Fi SystemsSiGe Semiconductor has announced the SE2559L, an RF front-end module designed to improve integration and reduce cost of Wi-Fi systems compliant to the 802.11b/g specification. The new RF front-end is based on a highly integrated architecture that is about 60 percent smaller than competitive products. With high feature integration, the SE2559L eliminates several external components, allowing manufacturers to reduce the bill of materials cost for 802.11b/g functionality by about 15 percent. The small size and low cost makes the SE2559L ideal for access points, laptops, PC cards and embedded Wi-Fi applications. Radiation Hardened Device for Use in Ultrahigh-Speed Bidirectional Point-to-Point Data Transmission SystemsTexas Instruments has announced the TLK2711HFGQMLV 1.6 to 2.7 Gigabits per Second Serializer/Deserializer. A member of the WizardLink family of multigigabit transceivers, the device is qualified to MIL-PRF-38535 (QML) Class V and is designed to support serial interface in high speed data bus applications for aerospace equipment, such as satellites. 
Digital AM/FM radio receiver chipset for use in automotive applicationsSTMicroelectronics has announced that it is sampling a new digital AM/FM radio receiver chipset for use in automotive applications. Sophisticated digital signal processing techniques allow the chipset to feature excellent reception quality while reducing interference even in presence of challenging signal conditions such as weak field and strong multipath (reflection from mountains and buildings). Fully Integrated Single-Chip Phone for the GSM ultra low cost handset marketSilicon Laboratories has announced the Si4901 AeroFONE single-chip phone, the industry's most integrated, highest performing single-chip phone for the GSM ultra low cost handset (ULCH) market. The Si4901 expands the company's family of single-chip phones to address demand for low cost, highly integrated GSM handsets in emerging economies. 
USB Host/Controller device enhances product connectivity and increases data throughputBy integrating high-speed USB2.0 host and On-The-Go controllers in a single two-port package, Oxford Semiconductor's OXU210HP provides portable consumer electronics designers with the means to enhance product connectivity and significantly increase data throughput. 
Gyroscope enhances GPS performanceMelexis has entered the market for accurate GPS position sensing with its angular rate sensor or gyroscope. The MLX90609-N2 will enhance the accuracy of GPS instruments in situations where satellite reception is lost, for example in tunnels, between tall buildings and mountainous terrain. Digital audio delay provides cost-effective synchronization of audio and video in a single integrated packageTexas Instruments has introduced the TPA5050 digital audio delay with IIC control. Designed for high definition and flat panel TV applications, the TPA5050 digital audio delay provides cost-effective synchronization of audio and video in a single integrated package that conserves board space and simplifies channel configuration. 
Highly integrated, IEEE 802.3af compliant, Power over Ethernet controllerSilicon Laboratories has announced what is said to be the industry's most highly integrated, IEEE 802.3af compliant, Power over Ethernet controller for powered device applications. The Si3400 is the only PD controller to integrate on-chip diode bridges, a transient surge suppressor and a switching regulator field effect transistor. The Si3400 controller's unprecedented level of integration simplifies PoE design efforts by reducing the total bill of materials, printed circuit board area and time to market. 
PC Card to USB and UART controller creates high speed data ports for wireless modemsCombining a 16-bit PC Card host interface, a USB 2.0 full speed host controller and a high performance UART, the OXCFU950 from Oxford Semiconductor provides the flexibility to support next generation, high speed PC and Compact Flash Cards for 3G cellular, mobile TV and wireless networking applications. 
SOLID STATE SUPPLIES PROVIDE DAA TELEPHONE NETWORK INTERFACE SOLUTIONSThe latest Litelink and Cybergate devices from Solid State Supplies provide interfaces for connection to telephone networks for both voice and data applications combining all of the required functionality and compatibility. MicroPHY transceiver for embedded 10/100 Ethernet applicationsAlpha Micro Components has available Teridian Semiconductor's new MicroPHY transceiver for embedded 10/100 Ethernet applications. Packaged in an ultra small 5mm x 5mm QFN package, the Teridian MicroPHY is said to be the World's smallest Fast Ethernet PHY. Targeted at consumer audio-video and industrial products the 78Q2123 features Hewlett Packard's "Auto-MDIX" technology whilst also providing a full 802.3 Media Independent Interface. 
Integrated RF synthesizers with embedded VCOsSTMicroelectronics has unveiled its new integrated RF synthesizers with embedded voltage-controlled oscillators, featuring what is said to be the lowest integrated phase noise and the largest band coverage on the market. 
Focus EDL and Metalink to demonstrate WLANPlus at “The Wireless Event” in London – Demonstration delivers high-definition television (HDTV) over wireless LAN at wire line qualityFocus EDL and Metalink will be giving live demonstrations of the capability of its new WANPlus chipset at "The Wireless Event" at London's Olympia on May 16 and 17. The demonstration will show, for the first time, advanced WiFi technology used to demonstrate the delivery of high-definition television over wireless LAN at wire line quality. 
Industrial Wireless Modules are R&TTE and RoHS CompliantAvailable from Low Power Radio Solutions are Circuit Design's latest Class 1 wireless modules for industrial use. The CDP-TX02E-R and CDP-RX-02E-R transmitter and receiver are R&TTE and RoHS compliant, narrow band, multi-channel modules. 
PC/104 GPRS/GSM Modem Has Integrated Power Supply and Digital I/OThe new Micronix PV-1800 from Datasound Laboratories is a GPRS/GSM modem on PC/104 architecture complete with an integrated 20W power supply, isolated 12-bit A/D inputs and digital I/O making it a very unique and low-cost solution for remote data logging and control. 
USB On-The-Go controller adds storage interface to speed data transfer and increase connectivityThe OXU140CM from Oxford Semiconductor is said to the first single-chip USB On-The-Go controller to integrate a memory host controller to provide seamless interfacing with SD and MMC memory cards and the new CE-ATA small form factor hard disks. 
Audio/video wireless RF modulesLow Power Radio Solutions has announced the introduction of the Airwave audio/video wireless RF modules. The modules operate on the most popular 2.4GHz ISM band and are FCC and R&TTE compliant, making them suitable for worldwide use. 
SATA storage controller with embedded encryption safeguards external dataWhat is believed to be the only SATA storage controller to feature an embedded encryption engine, the OXUF924DSE from Oxford Semiconductor, enables external storage manufacturers to provide users with the option of highly robust data security. By integrating hardware enabled encryption, the controller also ensures that high data transfer speeds are maintained, at in excess of 80Mbytes/sec. 
Eight-channel UART / PCI controller simplifies multi-port serial to PCI bus design.Combining eight high performance UARTs and a PCI compliant host interface in a single chip, the OX16PCI958 communications controller from Oxford Semiconductor provides designers with the means to dramatically simplify multi-port serial to PCI bus design. 
Switch boosts performance of wireless and video infrastructureThe Tsi578™ Serial RapidIO switch from Tundra Semiconductor increases the data throughput of next- generation communication infrastructure platforms, including ATCA® and MicroATCA™ applications. Complying with V1.3, the most recent version, of the Serial RapidIO Interconnect Specification, the switch is said ti set new standards in scalability and power economy. 
Versatile 2-port Ethernet Device with Added BenefitsReplacing two devices with a single cost-effective, flexible solution, the Micrel KS8842M from Solid Sate Supplies is the industry's first 2-port Ethernet device, with a third port that can be connected directly to microprocessors through a generic 8-or 16-bit bus interface. 
xDSL integrated splitter/filter modules save design time and boost voice qualityFocus EDL announces a series of xDSL integrated low-pass splitter/filter modules which have been designed to achieve excellent voice quality by separating voice and data signals and filtering interference out of the data signals in xDSL applications. 
High Reliability Wireless Switching ModulesLow Power Radio Solutions has announced its CDT-TX-01 transmitter and CDT-RX-01 receiver modules designed for applications requiring wireless transmission of switching signals. 
NemeriX extends technology leadership by delivering higher sensitivities for hosted GPS/AGPS ProductsNemerix SA has further extended its technology leadership in the GPS and AGPS markets by announcing a hosted GPS baseband processor which achieves indoor sensitivity as low as -158 dBm while consuming just 40mW. |
Headlines
 |
