Inductors
BI Technologies Develops Robust High Power Molded Inductor
TT electronics BI Technologies has developed a new surface mount power inductor. Designated the HM72B Series, the highly efficient, compact inductor measures just 6.8mm x 7.23mm, with a maximum board height of 3.0mm, and is designed for use in harsh environments.
Vishay Extends IHLP Family of Low-Profile, High-Current Inductors with New Device in the 6767 Case Size
Vishay Intertechnology launched a new IHLP® low-profile, high-current inductor in the 6767 case size. Featuring an ultra-low 4.0-mm profile, the IHLP-6767DZ-01 offers a high maximum frequency, saturation currents up to 92 A, and standard inductance values from 0.22 µH through 10.0 µH.
Trigon announces the entrance into the market for low-profile power inductors
With the introduction of its IRHL2D10P (3x3x1mm), Trigon announces the entrance into the market for low-profile power inductors that is fast becoming a key component for power supplies used in the mobile devices such as cellular phones.
Taiyo Yuden - 5MM Square Power Inductors
New from Taiyo Yuden, the NRS5020 (5.0 x 5.0mm, with a maximum height of 2.0mm) and the NR5040 (5.0 x 5.0mm, with a maximum height of 4.0mm) wire-wound power inductors offer the industry's best DC bias characteristics for 5mm square power inductors. Though more compact than conventional 6.0x6.0mm versions, Taiyo Yuden's new power inductors boast comparable performance.
PSC Series of RF Spiral Inductors for Wire Bonded Assemblies Features Low DCR to 0.26 Ω, High Q to 18 at 1000 MHz, and High SRF to 10.2 GHz
Vishay Intertechnology has announced a new series of RF spiral inductors for wire bonded assemblies. Featuring low DCR, high Q, and a wide range of inductance values, the Vishay Electro-Films PSC series inductors are supported by an available RF equivalent circuit model, which allows designers to generate highly accurate computer simulations of component performance.
Murata announces entry into large form factor power inductor market with introduction of 8x8mm wirewound chip coil series
Murata has introduced the LQH88P_38 series of power inductors, supporting up to 8A rated current. These inductors measure 8 x 8 mm (3131-size) with a low profile of just 3.8 mm (typical) and are designed for use in DC-DC converters for flat panel TVs, set-top boxes, recording devices, wireless base stations and other consumer electronics applications.
Murata's improved wirewound chip inductors contribute to DC-DC converter efficiency
Murata's latest 1212 size wirewound chip inductor series offers improved performance in the same compact, low profile case size. The LQH3NP_J0 series is designed specifically for DC-DC converter applications and features reduced DC resistance and increased allowable current.
DR217 Series Economical Radial Leaded Inductors Deliver Highly Reliable EMI/RFI Protection
Designed for accuracy and economy, the new Model DR217 Series Radial Leaded Inductors from Datatronic Distribution, Inc., combine superior performance, reliability and long-life.
Vishay - Low-Profile, High-Current Inductors in 2020 Case Size
Vishay has announced a IHLP low-profile, high-current inductor in the 2020 case size. The compact IHLP-2020CZ-01 offers a 5.18-mm by 5.49-mm footprint and ultra-low 3.0-mm profile, with a high maximum frequency and standard inductance values from 0.10 μH through 15 μH.
BI Technologies’ Dual Winding Inductor Deployed in GPS Systems and Handheld Devices
TT electronics BI Technologies has developed a surface mount dual winding inductor that can also be used as a common mode choke. Designated the HM78D Series, the inductor is housed in a rugged, cost-efficient package and exhibits excellent current handling characteristics.
Winged Low-Profile High-Current Inductor in 4040 Case Size
Vishay has announced what it says is the industry's first winged low-profile, high-current inductor in the 4040 case size. Designed to be placed on a cut-out PCB, the IHLW-4040CF-11 offers designers a high-current solution using a larger part, without exceeding a profile of 1.2 mm on either side of the PC board.
Murata's wire-wound chip inductors help save space and increase efficiency in DC-DC converters
Murata now offers its low DC resistance, high rated current wire-wound chip inductors in low profile 1515-size packaging (4.0 x 4.0 x 1.65mm), designed to save space and increase efficiency in DC-DC converter designs.
Vishay Announces Low-Profile, High-Current Inductor
Vishay Intertechnology has announced a new IHLP low-profile, high-current inductor in the 2020 case size. The compact IHLP-2020CZ-11 offers an ultra-low 3.0-mm profile, with a wide inductance range and low DCR.
Murata launches inductors with low DC resistance
Murata has developed two new series of low-profile wirewound chip inductors for use in DC-DC converter applications. Both the LQH3NP_M0 series and LQH3NP_G0 series of inductors offer low DC resistance, vital for DC-DC converter applications as it prevents energy dissipation from the inductor, improving the converter's overall efficiency.
Surface mount & radial leaded inductor ranges from Murata
Murata Power Solutions has enhanced its radial lead and toroidal surface-mount inductor portfolios with the addition of four new ranges of RoHS compliant components. The introductions comprise over 50 new part numbers that reinforce Murata Power Solutions' reputation as a provider of industry-leading magnetic products.
Murata’s latest EMI filter coil
Murata has announced the latest addition to its EMIFIL range of tiny common mode choke coils, the DLP11SA101HL2. The coil is designed to minimise electromagnetic interference (EMI) in HDMI and similar high speed differential signal lines, and features a high 6GHz cut-off frequency, making it ideal for use in 1080p applications. Its small (1.25x1x.82mm) 0504 size case and industry leading specification enables board space to be freed up without degrading performance or signal integrity.
Murata's LQW21H high Q chip inductors
Murata's LQW21H series of chip inductors maintains high Q of at least 35 in the FM band, whilst offering high inductance and small size. It enables designers working with FM circuits to miniaturise their designs without compromising on performance. This series is designed for any FM band application where board space is critical, for example, TV tuners for mobile devices.
Low Loss, High Saturation SMT Power Inductor from Focus EDL
Leading electronic components distributor, Focus EDL, announces the PG0702NL series of flat-coil surface mount (SMT) power inductors. Manufactured by Pulse, these inductors have a low DCR of 0.89 to 5.9 mΩ and a tight tolerance of ± 6% for higher efficiency. Inductance values range from 0.40 to 3.0 μH with a peak saturation of 15 to 45A.
Wire-Wound Power Inductors are 70% smaller than previous devices says Taiyo Yuden
TAIYO YUDEN (U.S.A.) INC. has announced the immediate availability of its BRC1608 series of high-current, wire-wound power inductors in EIA 0603 case size. Touted as the smallest power inductors available, BRC1608 devices measure just 1.6 mm L x 0.8 mm W x 0.8 mm H (all dimensions ± 0.2 mm). In addition to small size, the eight models offer an excellent combination of low DC resistance (0.06 to 0.55 Ohms), high inductance (0.2 to 2.2 µH) and high current ratings (0.98 to 0.28 A).
Inductive components for use in a wide range of power and EMC filtering applications
Murata Power Solutions has added ten new families of inductive components to its existing portfolio. The new introductions amount to well over 100 new part numbers and enable Murata Power Solutions to further enhance their comprehensive offering of wound ferrite magnetics for use in a wide range of power and EMC filtering applications.
New inductor products included in Finder's special offers
Throughout March customers of Rapid Electronics will have the chance to take advantage of special offers and discount pricing on the company's extensive range of electronic components. Leading the promotion as featured products are nine new ranges of surface mount chip inductors from Fastron. Rapid recently became Fastron's first UK distributor, and after strong sales of the brand's leaded inductors and suppression coils Rapid are delighted to expand their Fastron portfolio.
Radial-Leaded Inductors For Challenging EMI Environments
The new DR371-1 and DR371-2 Series Radial Leaded, Molded Inductors from Datatronic Distribution, Inc., combine high performance over a wide inductance range in challenging EMI operating environments with rugged packaging, ROHS compliant lead material, long-life and economy.
Bourns Power Inductors from TTI
TTI, Inc., has recently introduced Bourns SRP and SRU Power Inductors. SRP high current, low Direct Current Resistance (DCR) Power Inductors range in size from 7 to 13mm. The standard inductance range is from 0.1µH up to 10µH and can handle current as high as 50A and DCR well below 1mΩ - model dependent. An increased temperature range from -55degC to +155degC, resolves an area which has been an issue for some time.
Low-Profile High-Current Inductors
Now available from TTI Europe, the world's leading authorized specialist distributor of passive, connector and electromechanical components, is a new series of four low-profile, high-current inductors from Vishay, delivering high maximum frequencies and low inductance values.
Kemet moves into inductors
Kemet has announced its entry into the surface-mount inductor market. The company plans to offer a comprehensive range of devices including ferrites, surface-mount multilayer, and wire-wound inductors. The announcement will enable Kemet to offer electronics designers and manufacturers more complete passive component solutions.
Bluetooth Benefits From Chip Inductors
The latest family of multilayer chip inductors from Murata features exceptionally low DC resistance, making these miniature devices ideal for use in a wide range of high frequency applications where minimising power consumption is a critical factor.
Low Cost Chip Inductors
Murata has made available a range of low cost chip inductors. The parts are all offered in the space saving 0603 case size and are supplied on 10K reels for high volume pick and place manufacturing environments.
