Crystek Corporation
12730 Commonwealth Drive
Fort Myers
Fl 33913
United States of America
Phone
+1-239-561-3311
Fax
+ 1-239-561-1025
Web Address
http://www.crystek.com
Crystek's CVCO55CC-2122-2242 VCO (Voltage Controlled Oscillator) operates from 2122 MHz to 2242 MHz with a control voltage range of 0.5V~4.5V. This VCO features a typical phase noise of -105 dBc/Hz @ 10KHz offset and has excellent linearity. Output power is typically +7 dBm.
Crystek's CVCO55CC-1490-1550 VCO (Voltage Controlled Oscillator) operates from 1490 MHz to 1550 MHz with a control voltage range of 1.0V~10V. This VCO features a typical phase noise of -115 dBc/Hz @ 10KHz offset and has excellent linearity. Output power is typically +5 dBm.
Crystek's CVCO55CC-2175-2175 VCO (Voltage Controlled Oscillator) operates at 2175 MHz with a control voltage range of 0.5V~4.5V. This VCO features a typical phase noise of -120 dBc/Hz @ 10KHz offset and has excellent linearity. Output power is typically +7 dBm.
Crystek's new CVCO55CXT-6900-6900 Coaxial Resonator Oscillator (CRO) is a coaxial-based VCO with an internal proprietary frequency doubler. The CVCO55CXT family's frequency doubling, 2X fundamental technology reaches new performance levels of lower phase noise and much lower harmonics over the competition, while achieving lower current consumption in the process.
Crystek has introduced the 190 Series CCK26.5 and CCSMA26.5 Cable Assemblies, new additions to their line of Low-Loss RF Coaxial Cables. Designed to operate up to 26.5GHz, the 190 Series CCK26.5 and CCSMA26.5 Cable Assemblies offer a minimum bend radius of 1.1 in. and are available in-stock with 2.92mm (K) and high frequency SMA connectors, featuring rugged stainless-steel solder-clamp construction and heavy-duty strain reliefs.
Crystek's CVCO55CC-2510-2610 VCO (Voltage Controlled Oscillator) operates from 2510 MHz to 2610 MHz with a control voltage range of 0.5V~4.5V. This VCO features a typical phase noise of -110 dBc/Hz @ 10KHz offset and has excellent linearity. Output power is typically +3 dBm.
Crystek's new CVCO55CXT-5800-5800 Coaxial Resonator Oscillator (CRO) employs frequency doubling, 2X fundamental technology to reach new performance levels of low phase noise and harmonics, while minimizing current consumption in the process.
Crystek has introduced a new line Low Pass Filters, the CLPFL Series. Encased in a rugged SMA housing, this filter line is designed for test equipment and general lab use. Five models, with frequency ranges from DC to 100 through 500 MHz, compose the CLPFL line.
Crystek has introduced the CCK40 Series Cable Assembly, a new addition to their line of Low-Loss RF coaxial cable assemblies. Designed to operate up to 40GHz, the CCK40 features rugged stainless-steel solder-clamp construction and heavy duty strain reliefs. This low-loss cable provides an attenuation value of 0.90dB/ft. at 40GHz. The CCK40 Series cable offers shielding effectiveness of greater than -90dB with an operating temperature range of -55 to +85ºC (extended range of -55 to +125ºC available through special order).
Crystek's CVCO55CC-2620-2710 VCO (Voltage Controlled Oscillator) operates from 2620 MHz to 2710 MHz with a control voltage range of 0.5V~4.5V. This VCO features a typical phase noise of -110 dBc/Hz @ 10KHz offset and has excellent linearity. Output power is typically +3 dBm.
Crystek's CVCO55CC-2620-2710 VCO operates from 2620 MHz to 2710 MHz with a control voltage range of 0.5V~4.5V. This VCO features a typical phase noise of -110 dBc/Hz @ 10KHz offset and has excellent linearity. Output power is typically +3 dBm.
Crystek's CVCO55CC-3345-3955 VCO (Voltage Controlled Oscillator) operates from 3345 MHz to 3955 MHz with a control voltage range of 2.5V~23.5V. This VCO features a typical phase noise of -100 dBc/Hz @ 10KHz offset and has excellent linearity. Output power is typically +3.5 dBm.
Crystek's CVCO55CC-2440-2540 VCO (Voltage Controlled Oscillator) operates from 2440 MHz to 2540 MHz with a control voltage range of 0.5V~4.5V. This VCO features a typical phase noise of -110 dBc/Hz @ 10KHz offset and has excellent linearity. Output power is typically +3 dBm.
Crystek's CVCO55CC-2580-2650 VCO (Voltage Controlled Oscillator) operates from 2580 MHz to 2650 MHz with a control voltage range of 0.5V~4.5V. This VCO features a typical phase noise of -110 dBc/Hz @ 10KHz offset and has excellent linearity. Output power is typically +3 dBm.
Crystek has introduced a new line of low-loss RF coaxial cable assemblies featuring rugged stainless-steel solder-clamp construction and attenuation of 0.36 dB/ft. at 18 GHz. The LL142 Series cable offers shielding effectiveness of greater than -110 dB with an operating temperature range of -55 to +85ºC (extended range of -55 to +125ºC available through special order).
Free Component Search Tool
